Recent content by dsesler

  1. dsesler

    36V-10AH LiFePo4 Charger-Controller Issue

    It turns out I spoke to soon. I thought all was well, but the battery is not taking a charge. I still have no idea how I would figure out whether the issue is the charger or the BMS. Anybody have any advice? Can I buy a matched BMS & Charger anywhere and just rewire the battery pack I have?
  2. dsesler

    36V-10AH LiFePo4 Charger-Controller Issue

    Ok, so I tried to take the battery apart this weekend, but I forgot about photos until it was too late. Sorry about that. That 20 pin connector really does have wires running to every single pin (it looks like its about 20, I did not actually count them). All of the wires connected to the...
  3. dsesler

    36V-10AH LiFePo4 Charger-Controller Issue

    I pulled this pic from their website, its a pretty good shot of the connector, and what I have to take apart. It should not be too complex, but I want to wait until I can have a couple of hours undisturbed so I can take it apart correctly.
  4. dsesler

    36V-10AH LiFePo4 Charger-Controller Issue

    I'll take it apart this weekend and post some pics.
  5. dsesler

    36V-10AH LiFePo4 Charger-Controller Issue

    Nope. Nothing was changed and I did not think I did anything different. They shipped the battery and charger with this really odd connector with about 20 pins. The connector was awkward but functional, I was always having to fiddle with it to get it lined up properly. My best guess is that I...
  6. dsesler

    36V-10AH LiFePo4 Charger-Controller Issue

    When I plugged in the charger for my Golden Motor 36V-10AH LiFePo4 battery last night there was a huge spark. I'm not sure what happened, but bottom line is that the battery connector pins are damaged and I'm guessing the controller and/or charger is fried. Any troubleshooting suggestions? Is...
  7. dsesler

    my ampedbike kit review

    Here is a speed histogram from my GPS datalogger: I live in Austin, TX, which means moderate hills and moderate winds for the most part. I chopped off anything below 12.5mph, but its likely that some of the lower speed numbers were still acquired during acceleration rather than climbing a...
  8. dsesler

    my ampedbike kit review

    I got my kit from Ampedbikes about 10 days ago and installed it on a KHS Urban-X bike, and I bought a 36V-10AH LiFePo4 battery from goldenmotor.com. The kit was complete and no issues at all with the installation. The wheel spins up to about 21.2mph unloaded, and me and my 195lb frame cruise...
Back
Top