Recent content by EEDan1010101

Hi Guys, I am working on an EV gokart. It was working fine last week, but today I noticed at start up there is no response from pressing on the throttle. I'm using a sevcon gen4 motor controller and the motor is a motenergy1115ME. I checked the batteries and they are charged. I plugged in the...

Can anyone help me out. The trip analyzer does not let me view acceleration or torque data. There is no option under my graph why?

72 volt Sevcon Gen4 size 8 I think they are lithium batteries The kart is around 300+ pounds with the driver. These are the trip analyzer graphs for both trips. This is with the kart wheels off the ground. This is a test run around a parking lot why is the mph almost half while on the...

I'm working on a EV goKart with a motenergy ME1115 motor. The top speed while the wheels are off the ground is 51.8 the top speed in about a 1/4 mile straight away on the ground is 31.5 Is this normal? Even if the straight away was 2 miles I don't think the kart would reach upper 40mph so is it...

Thanks for the response. I found a couple other threads about programming a sevcon controller with a motenergy motor. It seems like most people were referred to John at Motenergy for the correct motor controller settings. I e-mailed him so I hope I get a response.

Hi Guys, I have a Motenergy ME1115 Motor and I'm using a sevcon gen4 size4 motor controller. I bought the USB-CAN and have the DVT software, but I'm wondering if there is a dcf for this motor.

Hi guys, I'm using the Motenergy ME1115 PMAC motor with a Sevcon Gen4 size 4 motor controller. I have the usb-can connector and the DVT software, but I really have no idea where to begin modifying the configuration, I know how to use the DVT software and read the tutorials, but I am not sure...

Hi, Thanks for the quick response. Anyone have a suggestion on the best way to keep track of which files from the analogger correspond to each time trial? I know the files have the date, but we're testing the kart after making each change to the motor controller so at the end I load the files...

Hello Guys, I am working on a EV Kart and we are using a Cycle analyst and analogger to track the speed. The speed is showing on the analyst, but I do not know what to plot or how to view the speed of the run. I have the analogger hooked up to my laptop and I know how to retrieve the CA files...