hello Vedder,
I understand the Problem.....not nice to hear but it is acceptable.
Maybe i can go on a 6s Setup with 180A do you think the detection will work up to 120.000 eRPM? I cant go down to 5s....
I even know that 180A is much too high for your VESC but iam working on a schematic with...
hello Vedder
which problems do you mean? Firmware problems or Hardware problems?
What max eRPM would be possible in Firmware?
How do you calculate the eRPM?
The ESC is for a RC Boat with 8s at 2500kv with 120A. (I know the VESC isn't made for 120A....its just for testing).
The Inrunner has a high cogging tourque ;)
I resoldered the DRV and the MC and change the Detection parameters to 15A an 1000RPM. The detection was good an i overwrite the...
Hello Guys,
last week i got one VESC PCB (V4.7) and ordered the parts from Mouser (BOM 4.7). Now i have assembled the VESC and flashed the Firmware (1.10). I can connect the VESC with the PC an can run my motor.
But the detection of the Motor paramters do not work. I get the Message (Bad...