Recent content by FlyByNight

Your post had me confused so I had to go look and as it turns out the 4010 DUO I have has it's own PS box... It's been so long since I used it that I actually forgot and was thinking of an older charger I had before this one. What the charger is using is a Junsi S1200. It came with it when I...

Adding Mean Well P.S. to the load will get very heavy. Remember, I'm not on a Motor Cycle or anything of the sort. I'm riding a recumbent Trike over 12,000KM with my daughter so I desperately need to keep the weight down. She is only able to tow about 30lbs (She'll be 10) and I can tow approx...

Cost is a HUGE issue for me. I am disabled and low income. :oops: I need to keep it as inexpensive as possible, but still be able to pack in as much mAh, for distance, as I possibly can. I don't "have" to use MultiStar, per say. Just as long as whatever setup can carry the maximum mAh possible...

Now that you mention it I realize that maybe I should update this schematic. Instead of the 2 12V 20AH batteries to power the schematic I could instead use 2 4S 10AH (20AH total) Batteries with a DC-DC to take it down to 12V. That will bring down the weight drastically and should still last me...

This is where I get confused.... I definitely need higher mAh so I can get more distance (I'm more than happy to even go above 40,000mAh too) :wink: , but weight is also an issue for me. I need to keep the weight as low as possible.

I can't wait to read your posts as your setup seems to be almost identical to what I was going for. I do not have the cable needed for the MOSFET to reprogram it, but I am sure I can pester Lyen into selling me one :D The price is what has drawn me to the MutliStar batteries as I am a low...

The current batteries I have are depleted and being completely replaced. An idiot room-mate I " USED " to have put my battery bag into my shed in the winter thinking it was something else and they got damaged (depleted). I wanted to do the same "kind" of setup but (from what I was told) to add...

Thanks. The trike does have a motor, but the battery setup is much different. The BMC V3 Motor runs off 8 lipo batteries running in Parallel & Series to total 37V (Being upgraded to 44.4V soon) which is more than the 12V needed. The idea behind these batteries is that I should only need to...

I had to edit my original post... Realized a typo. The batteries I was using were: 8 x Turnigy 5000mAh 5S 20C - 30C Lipo Pack. I had 2 sets of 4. 1 set running in parallel to give me 18.5v 20,000mah. I then have a second set exactly the same. these two are then linked together in series giving...

As for the Solar portion of this. I have the following Schematic that I designed. I used 2 batteries in the schematic (even though there will be more) as it seemed like a better idea at the time, but found out it would weigh more and I would prefer less weight (The MultiStar are also less...

Hello everyone. A couple years ago I purchased a used Recumbent Trike (WizWheelz Zoomer - Pre-TerraTrike). This trike came with a BMC V3 motor in the rear 26" wheel. Attached to it is a 12 x 4110 MOSFET Extreme Modder Controller LYEN Edition and a Cycle Analyst V2.4. With the trike came 8...

Just a little schematic I threw together. I am open to "NICE" criticism, ideas, or suggestions. I am in no way knowledgeable in this field. I actually had to learn all of this as I created the schematic. I would Love to hear all feedback, except nasty messages... I own a WhizWheelz Zoomer (Pre...