Recent content by freexxx

Hi How is it actually with overheating? A friend lives in the same city as me and uses stock firmware without a temperature sensor and rides high hills with max assitance and max Amp 16A. VLCD05. I drive 860C and last firmware v20.1C.3 new. On the same route as him i have no problem warming up...

where it is possible to find the original(stock) firmware version for LCD 860C. Is it possible?

why don't you use the battery indicator for a percentage connection with the residual battery voltage? if I charge the battery for about 1-2 hours, it will not appear on the dislplay... i think the connection between max charge voltage and min discharge voltage. I know it's not that accurate...

Problem solved I tightened the main nut and support bracket. I chose the left bearing, which was inserted afterwards. :bigthumb:

Hi, now I have 650 km on the TSDZ2 and now I hear a slight crack when turning the pedals it's not always. The sound comes from the engine. I also have a new chain as the original has been pulled out. What to check? Do I have to disassemble the whole engine? I have added 2 bearings for left and...

Exactly mbrusa. it si only: It does not affect the operation of the engine, it is only annoying the need to disconnect the battery. For me no big problem. :mrgreen:

Hi , sometimes I have problem with error 0x2 0x8006090 on 860C display. The error is randomly displayed when I am in the settings menu and enter the submenu. The error only appears occasionally. Then all that remains is to turn off/on the switch on battery. Shutdown via LCD remote does not...

I think the TSDZ2 has a small engine with weak cooling. I see the maximum constant power somewhere on the border of 250W. In the short term, maybe 750 W, but I quite doubt the dimension of the gearbox. I have a temperature limit of 70C and an off limit of 85C. Power limited to 460W and I have no...

HI I have 860C with 860C_v20.1C.2-bootloader.bin and TSDZ2 with TSDZ2-v20.1C.3-860C.hex. Now on v20.1C.3 version I have 85km and no problem. I have temp sensor(70C/85C) never over 77C,power limit 460W, limit current 13A- never over 11A. :confused: Thank you for warning.

wobbling is only on outer of CSK30P and axle but only little bit. But orginal BAFANG,BOSCH,YAMAHA,SHIMANO there is a wobbling nowhere. I haven't noticed an improvement by adding bearings

HI problem with wobbling .... I'm recording a video, it's just an outer bearing CSK30P, is it normal ??? by adding 6902 LLU MAX and 6902 2RS I did not solve the problem. https://youtu.be/F44vOpmszMU

yes Rainer, this is a problem ... but if there will be new firmware, please can you add an option: Run password display: with setup option ... easy implementation I think... Where I live a lot of people are tempted to press buttons and start an e-bike. For example, a trip to a food store and...

UAU :shock: it is cool solution just insert the bearing and O-ring? some exact procedure "how to" you do not have please? This problem I read have more people thanks Elinx,Waynemarlow :bigthumb:

thanks .. you mean install next bearing on left or right side?

Hi please can you publish your settings etc. for 860C in C3 firmware? I mean max speed,max current,motor acceleration,Motor Deceleration,Motor faststop,Field weakening, ... and others... 1. Now I have a problem, I use 9 assistance levels, but from 1 to 5 I feel different(OK), but 6-9 I don't...