j bjork's latest activity

Yes, ant is a brand of bms. This thread might be interesting to you too, even if you are not using vesc: Making bms's VESC compatible

I haven't updated this for a long time.. Mostly because nothing have happened 🙁 I have got some alu to start welding as soon as I...

I haven't updated for a while. I have been a little too busy. I got the suspension back and have ridden with it twice. He fixed the...

My fardriver is a little older and has less settings than the new ones, but what I found was basically that the only setting I thought...

Each grade has its own acceptable level of capacity variance. So ”Grade B” doesn’t have a larger than acceptable variance for the...

I think these modules are probably a pretty good idea to use, at least if you can fit at least 4 of them. You should get a battery of...

When I had fardriver on my bike I had a "disable throttle" or something like that installed. I think it was just grounding a signal wire...

2 modules in series would probably work fine, but with a little limit in power (Limited to about 400A, maybe 35kw or so) and range. If...

For a full-sized bike, sure, but for a scaled-down Surron clone I personally think that's plenty. Either way, adding power is probably...

Good points, but I think 7-10kw is still on the low side, I would want to double that. There are several other options than QS165, maybe...

Small update: - added more cycles - started 2C charge-rate test Thoughts and comments: I'm still thinking about how to run a 5C...

What do your logs say? How much voltage sag? Is the current tapering off at higher speed? If the voltage sag isn't too bad and the you...

I have been struggling with the reverse problem. Hackey suggested to add a ceramic cap between ground and signal to filter. From those I...

Nope. On my end, Grade A for 2500pcs is quite a a bit more expensive than that :)

It says $2.30 on the site? Very good anyway, but are those grade A?