I had not indicated it, my motor and battery are 48 V, and the software I downloaded is for the original screen, maybe I should buy a new screen to be able to see the data on the screen while pedaling and draw better conclusions
The use I give it is on a MTB with steep slopes and descents. I have thought about the demagnetization but since it does not have that dark color that was shown in any photo, I was not sure. The engine warms up long before cutting by the temperature sensor, but those sudden cuts occur even with...
I have had a problem with TSDZ2 for months. At first he noticed that the power had decreased, he was pushing less and less. Later it began to happen that from time to time it would go off, especially after a while pedaling and more likely on a steep hill. To try to find the problem I have...
I have had a problem with TSDZ2 for months. At first he noticed that the power had decreased, he was pushing less and less. Later it began to happen that from time to time it would go off, especially after a while pedaling and more likely on a steep hill. To try to find the problem I have...
Can the st-link be permanently installed on the bike? I have soldered the cables to both the hardware and the st-link, and with very short cables, it has been the only way in which I have no communication problems with the software STVP
I suspected it was a connection problem, now that you agree on the same suspicion, I will check the wiring
Thank you for your help and your work developing the software and collaborating on the forum.
Hello, after multiple problems I managed to install the previous version of the mbrusa software, I was going to install the new version and I have a problem again ... does anyone know what could be the reason?
Right now the software has been deleted but the new one did not load so the e-bike...
Thank you very much, that was the problem, I had not activated "set path" checkbox, now I will mount everything and test the bike with the new firmware
I have tried the compilation again and those lines have appeared ... I don't know why they didn't come out the previous time. It continues to fail and the process does not end.
Hello, after having managed to have no errors when connecting the stlink with the stvp program, now when trying to compile the latest firmware I get errors and the process does not continue ...
I have downloaded all the necessary programs in C: ST software, SDCC compiler and firmware
Some help?
I bought a 850C on Aliexpress and I tried to flash the firmware, but the screen does not turn on. Will it be a faulty screen? Connecting the brown and black wires to positive and negative at 52 V, should the screen turn on?
I bought a 850C on Aliexpress and I tried to flash the firmware, but the screen does not turn on. Will it be a faulty screen? Connecting the brown and black wires to positive and negative at 52 V, should the screen turn on?