Recent content by jucasan

I think is 2900 mAh https://www.orbtronic.com/batteries-chargers/panasonic-ncr-18650-2900mah-3.6v-li-ion-rechargeable-two-batteries-with-protect-case

Really? Why. Too cheap or too expensive?? I'm thinking about just getting the "free" battery and with more time and research get something better. I thought Bafang was a good quality product. There are better options out there? Thanks

Sorry about the link https://bafangusadirect.com/collections/motor-kits/products/complete-bafang-1000w-bbshd-mid-drive-ebike-motor-kit-battery and regarding the battery there is not much information and specifications. I'm struggling with the idea of how much is 1 amp. I know there are formulas...

I'm thinking about getting a Bafang 1000W kit but not sure what battery is the best option. I don't know but I read in a review that for example the 52V battery is not worth the money. It's better to stick with the 48V. I would like to keep it in the <$300 range. Also, the gear sensor works...

Thank you Amberwolf, don't understand with they have 3/4/5/9 pins but at least I know they are available.

I'm interested to buy a Bafang motor for a project bike but I'm a bit concern about the length of the cables. I can't find information how long the standard cables are but in case that are too short. Can I get an extension for the display and throttle or there is a way to make one? I'm a newbie...

Why the pictures are blurred?

I have a CA version 3.0, a Grin thumb throttle, Astro Flight 3205 and a Phoenix edge hv 80. This is the setting in the CA Throttle Input Settings Input Throttle Mode Pass-thru Zero Throttle Threshold 1V Full Throttle Threshold 4V Fault Throttle Threshold 4.35V...

Anybody here from SF who knows how to connect cycle analyst and a phoenix edge hv 80? It's working but have some issues and can't figure out what is going on. If someone can help me would be great. Thanks

I'm working to put together my ebike and the CA, Grin thumb throttle, Phoenix HV80 and the Astro 3205 don't like each other. With the throttle off there is a beeping in the controller. https://www.youtube.com/watch?v=IdCrDbKVmSo As soon I squeeze the throttle a bit the beeping stops and the...

This is what I see. SETUP THROT IN <- 0.88v 00% Thru-> I hold the right bottom and get this Pass-thru Min Input:1.00 Volts Max Input:4.00 Volts Fault Volt: 4.35 Volts Auto Cruis off Cruise Hld .15 Volts

Are these empirical values? I tried Thr0 Max Out: 2.02msec but the LED on the controller goes red when the throttle is half way. With a value of 1.84msec I can go WOT and seems to work OK. With Thr0 Min Out: 0.98msec the motor starts spinning as soon as I power the system. The value of .90msec...

Dave, I'm working in my first e-bike. Mid-drive with a cycle analist, Castle edge 80 and a Astro 3205. The problem that I have is when I move the throttle half way the red LED on the controller goes off and the motor stops. For what I read sounds like a throttle out issue but don't really...

Set up Thr0>OutputMode=rc pulse Thro>brakeOut=0.4 Thro>MinOut=0.3 But the LED is still blinking and the motor is not running. Any other sugestion? Thanks

I'm working in my first project and connected a castle creations hv80 as described in the CaV3-RcEscHookup.png picture. The CA works and the throttle seems to work too since I see the throttle going up and down on the CA display. The problem is there is a red LED blinking on the controller and...