Recent content by lennovich

Hello, Anyone a idea...when i set my charge setting on, the bike stops with power after the first twist of the trottle and goes in "charge" mode on the screen. When the setting is off no problem.

Hello, Can i fit a 19"x 1,6 rim in my vector with a 90/90 motorcycle tyre?

After 2000km riding all terrains still goiing strong...

with a max e you can wheelie all day long :lol: But a wheeliecontrol is not that easy i think. Think it works with gyro sensors...

Anyone an idea how it come that my regen does not work anymore after the update for the PAS. If i brake the motor shuts down but doesnt regen. So the connection is fine. In my settings the regen mode stands on. Battery also not fully charged. I searched a couple hours in the settings but nothing...

Hello , Anyone tried the Pas already? How can i turn this thing on? I mounted the sensor and all connected. But I can not find any programming for this...In eco mode the throttle worked as before but that is not what i want with a pas...

The bearings are a piece of shit , i changed it with more expensive bearings . all good now...

Hello, I recently bought a usd 8 fork, now after hit a little tree my left upper tube (the gold one) is a little bit bent. I mailed to dnmshock in china for some spares...they don't answer. A distributor in austria said to me that DNM don't offer spares... :? :? The dnm shocks are very...

Hello, Is it possible to use the pas sensor only in eco modus and in boost mode no pas just throttle??

Controller goes in protect mode otherwise...what the reason of the extra resistor is i don't now...maybe the adaptto crew can answer this.

quick update on my controller guys...i soldered a 30kohm smd resistor on the resistor that adaptto said en it works fine! Can set full phase amps now without motor cut... :D :D It's a beast now :twisted:

What do you mean with apply the thermal setting?

That is really strange . my controller needs soldering extra resistor. i'm pretty sure its no voltage sag problem at mine.What i don't understand is that there are not many people with these problems. I measured that there is a 8,3kohm resistor on my controller. No i have to put another 30kohm...

Thats a problem with halls sensors or the wires to the halls. Check it out with a multimeter.

i read this on the adappto site "With UNLOCKED firmware the power doesn’t decrease when the supply voltage exceeds 92V. But you need to be very careful when riding with supply voltage more than 90V. There are voltage surges when the controller is operated at high phase currents (e.g. the higher...