Recent content by lichKing

I have a cheap cadence PAS and a cheap chinese controller. The PAS I'm using comes with a disc that has 8 poles. Everything was working fine until I changed my hub motor from a 200W to a 1000W motor. Before, when I pedal forward, the PAS kicks in after one crank rotation and the motor runs...

I tried a different PAS sensor, it's a smaller sensor with only one hall sensor (just found out that the original one has 2 hall sensors), and everything seems to work fine, using 8 poles and the motor kicks in after 1 crank rotation and I can pedal at any speed I want. I guess the PAS with 2...

I’m using a Chinese controller that I bought on aliexpress. Doesn’t seem to have any programming wires on it. The controller that I’m using is similar to this one.

I’ve reduced the number of magnets on the disc to 12 by poking half of them out. I now don’t have to pedal as slow for the motor to kick in but it’s still slower than I’m comfortable with. I feel like I have to pedal at a specific RPM, any slower or faster and the motor shuts off. Is that how...

It's similar to this, but the disc has 24 poles.

I installed a cheap 24 pole PAS I bought from aliexpress. When I pedal the bike at a natrual cadence, the motor does not spin. I have to be pedalling unnatrually slow for the motor to start spinning. Then it works perfectly, just that I have to pedal at this slow cadence. Any faster and the...