Recent content by masagero

So after yesterday we have made great progress thanks to eee291 for which I thank him. It remains to balance the battery. For now everything works well. Special thanks to Eee291.

So ... I changed the capacitor and I measured the voltage and I found something strange the voltage was not constant, but we have progressed the charger without problem. With one of the potentiometers I was adjusting the voltage, but with the voltage changed the amperage. From the beginning, as...

as far as I know, there must be a load. How do I simulate a load? Of course I have a multimeter

Thanks for the advice, but nothing happens. I rotate them all three potentiometer, but nothing changed.BMS cut off the connection by passing over 58v. Think about whether to put some resistance? What do you say about it? I found a problem with one of the capacitors - I will change it.

I do not find a potentiometer

So there will be no problem charging this charger after I have bms?

This is the charger. I have smart bms programmable 300A

I ask for an expert opinion: I have a charger for 22 lion cells, can I charge 20 cells?

masageroo@gmail.com

You have PM

Hi guys can you tell me what is the difference between qs 205 50h v3 and gs 273 4000w for e bike?

Hello I have questions about using savboton 72150: 1. I have 22s8p battery and loaded is 92.4v can i use this controller? 2. Regeneration will have problems? thanks in advance

Thank you all for the help. Cable has made the communication is better. I have questions about programming: Controller My Lyen 12fet motor is MHUS 3000 v2 battery has a nominal 82v which profile to use (the box says to use profile EB318) and a program is obtained discrepancy in the set...

I want to do programming cable for controllers Lyen EB3xx. Should there be a button?