Recent content by Michall2008

Hi All, Got my Mercury couple day ago, I connect it through my system and all working well, one thing though, the forward capacity count not responding, it always shows the same number something like 0.12Ahr. Michael

Hi, Thank you evrybody, Dogman, You are saying that the em3ev DD 275 rpm motor will take that hill, this is great. The DD motor is 130$ cheaper than the guard, and i will have regen braking :D I will definitely go with the DD. The battery is OSN's 16s 20a Lifepo4 (a12320ahM1 cells) Michael

Thanx Dogman, After more detailed examination of the section I found out only 1500 meters of the 5.85 Km is over 10% grade, Should I still go with the T12 ? How can I estamate the power consumption for this section Michael

Hi ES, This will be my second ebike build, my good friend asked me if I can build him an ebike to get him from home to school, I asked him for the distance, he replied 5.5 - 6 Km, i said no problem it will be done (he just did not mention it is a 450m elevation in does 5.5 Km :shock: :shock...

Thanks bowlofsalad I got myself a front maxxis tire, it works great. Here is another solution http://www.kickstarter.com/projects/1205277475/loopwheels-for-a-smoother-more-comfortable-bicycle?ref=search

Hi all, I'm on the final stages on my conversion of a Dahon D7 to electric. The bike by it self is great it's light, neat and quick folding. One thing though is the lack of suspension. Changed the original seatpost to a spring based one, i'm happy with that. The lack of front suspension is...

Thanks Bee, I am low budget on this one, something In the DIY zone ?

Hi ES, This is really off topic, need some advice So, I have 3 cats (two black and one white), the black cats (Punch, Baby) are brother and sister they are in good shape, The problem is with the white one (Mio) she is really fat, it looks like she's pregnant :shock: . I want to put Mio on a...

Hi Danny, Just got the Mercury totay, and I think i killed it :oops: ,i was connecting the ports and didn't notice i dont need to connect port 4 +5v to controller, a little spark and no respond from the Mercury no lights no bluetooth connection :cry: . Does warranty cover my case ? Michael

Hi Allex, Very neat upgrade 8), i have also upgraded my evo scooter from SLA to 12s a123 20a, but still stuck with the stock motor. How your motor act on hills, does it get hot ? Here is something that will make charging match easier for you: Michael

Hi teklektik, Its ok now every thing works fine, I followed Justis instructions and put a 1K resistor across negative and positive controllers Thi that solved the problem. :D Thanks again teklektik :wink: Michael

Thank you, teklektik, amberwolf, and Justin for your help :D The 1K resistor did the job Wonderful product and customer service Michael

1. Its 1KW/36V YK43 brushed controller 2. The voltage is always zero 3. The same thing here, always zero 4.As a load im using 2 halogen bulbs, pulls about 900W at WOT. Start glowing at 1.8, WOT is 4.83 (I'm using a not very accurate voltmeter so +- 0.1v) Instead of connecting the CAs ThO to...

Hi teklektik, Yes, when the throttle connected directly to the controller it work fine. Yes, The throttle is connected to CAs Thi plag via the original connector (all three wires) Yes, when i push the throttle the diagnostic numbers follow and the throttle gauge is also moving. I connect a...

Hi, I'm having throttle connection problem, just can't get it work. The set up: throttle is connected to CAs Thi, DP cable is connected to SA-sunt, there are 3 wires running from the SA-sunt black, yellow, green and 3 wires running from the controller black, red, blue i connect the blue and...