Recent content by MrTadpole

Thanks for the advice and the push in the right direction. That thread really helped me figure out what I will do next. I'll check if I may have blown the let while I am at it. Also, when you said that full battery power goes through #8, I am running at 36v, so that seems scary since the...

Here is the other diagram.

Hey all, So over the summer I came upon 2 version one GM Magic Pies. Both work fine. Using one and had to make my own cables for all the features I wanted (throttle, pedal assist and regen braking). I found files online that give all the functions of each wire and carefully made made a...

I let em3ev know. And I now have the battery working on the bike. Only off thing is the leds on the side just appear not to change with charge level at all. The app works flawlessly though so I guess it isn't a huge deal right now.

Also, thank you all for the suggestions and perspectives! You guys totally rock! 8)

So one issue I have identified is that the positive wire in the base snapped from the point that connects to the battery. I have succeeded in fixing this for now, but I may have to get a new pin later on because the way it snapped made it almost too short to get a proper joint made. Because...

I'm just metering it from the discharge points (with the pack disconnected from the base/holder thingy). So just from the prongs that would connect to the base. The motor I am running is a gen 1 magic pie. I know the controller is designed for 24, 36, and 48v inputs. As far a a the battery...

Hey all! New here and I just got a 36v 19.95ah battery from em3ev. So I initially went to charge the pack and let it sit for 2 hours before I planned to use it. Before charging I noticed all 3 green LEDs and the one red one were on simultaneously. I thought it was off because none of the...