Recent content by notfatjustbigboned

  1. N

    BBS01 with 28T cluster? and 42T chain ring?

    Hi, Just for reference - I am 20 stone and have the bling ring 42t front and 12 - 28 tooth cassette with a 250W BBS01. It gets me up all my local hills with little effort, max around 10% gradient. I was surprised at how powerful it is around 60rpm. :)
  2. N

    BBS01 improving contact on bullet connector

    Hi, A small tip for improving performance on the 250W BBS01 with bullet connectors. I fitted an ebike front light with bare leads. I pushed the bare fine copper wires in the female half of the battery connections, then mated the male half. I noticed an improvement in power (and therefore also...
  3. N

    How to remove spindle on BBS01?

    Hi, Looks the same as mine. It is a flexible seal - I don't think it is threaded. I removed mine by pushing something sharpish (I used a bradle) between the outer edge and the metal, then hooked it out. Behind it is a locknut that you will need a special tool to remove. Good luck :)
Back
Top