Recent content by nycbicycleshop

Hi Everybody Thanks for all your help but still this wheel don't want to roll :D There is no led on the controller board, I try aroundqube suggestion but nothing. I have another 48 volt controller, I want to give a shot with this system 36 volt 250 watt motor and it worked, but one small...

Hi Actually I already try the self learning cable plugin and out but nothing happened (white cable), also I didn't find any power switch for this controller, usually all controllers has two cable plug for battery connection but this controller has 3 cables, one is power+ in, one is power- in...

Hi d8veh Yes you correct it dropped to 5v all measurements is okay but motor doesn't turn. Throttle is connected input and out voltage is okay (when I twist the throttle), motor phase and motor hall sensor connector connected (input voltage is okay, moving the wheel give us a voltage is okay)...

I tested this controller when only main battery power connected and power switch is on. the result is throttle voltage is 5v but hall sensor voltage is 14v, If I connect everything even I am receiving 14v on the hall sensor power out what could be the result? burn to hall sensors board?

I am using 36 volt 250 watt rear brushless generic hub motor, I already know the motor phase and hall sensors and throttle connection, my main concern is the switch connection, I follow the board guessed thin red cable cable on the power plug but when I connect this thin red cable with thick...

We just bought one controller from Ebay https://www.ebay.com/itm/311933624386 for replacement of our 36 volt 350 watt rear hub motor but all the connection is confusing, on the ebay wiring information slightly different than what they send it to us. First we connected only power input and read...

Hi Everybody We just order one controller from Amazon https://www.amazon.com/Sunwin-Electric-Bicycle-Brushless-Controller/dp/B00DBM0WFC for replacing our 1000 watt 48 volt brushless front hub motor controller but all cables are different than ours, we stuck with the throttle connection, Our...