Recent content by OttawaEbiker

Thanks ktronic, everything works perfect now. I had not understood how quick the short click had to be.

Hi, My build is almost complete, took a quick test ride today and the motor seems to work well. However I have a few issues: 1- The UP/DOWN buttons (850C) are reversed. I click on DOWN to increase the assist level. Another user (nassal) had mentioned this problem but I couldn't find a...

solved it! I must have made a wrong move with program memory tab and data memory tab in the programmer, i download the stock firmware, rewrote all the tabs then reapplied the 0.51.0 OSF and the display boots normally. yaye!

another piece of info... the display is showing (at the bottom) this message: Waiting TSDZ2 - (51.1v) Is 51.1V a normal reading for a 48V system?

Hi dameri, Thanks for the response, appreciate it. Yes I've checked that it's firmware 0.51.0, but I did find that file from someone's google drive as I was unable to find it in the official firmware archive. Maybe I have a bad copy? I am using the 48V version of TSDZ2, is the firmware...

Hi everyone, I'm having a problem with the 850C display and TSDZ2 combo. I've flashed the motor with firmware 0.51.0 and the display with 0.6.2 However when i power up the display seems stuck on a loading page saying 'keep pedals free and wait' do i need to ride the bike for a bit to get it...

Ok makes sense, thanks for the explanation.

Is there an order of precedence for the assist modes? it seems I can turn on all modes (power, torque, cadence, emtb) in the config menu, so what happens if they are all enabled? do I need to make sure that only one is enabled at a time?

You're welcome mittkonto! Hope it worked out for you.

Big thanks to all involved for programming and testing...I've just started putting together my TSDZ2/KT-LCD3 combo and can offer the following advice for a newbie: - KT-LCD3 flash.... the 0.20 hex file on the official site does not seem to work....spent several hours recabling my ST-Link...

Thanks for the information. I'm sure I have several weeks of waiting before receiving the motor so I'll be monitoring all the temperature fix threads closely.

I've got a TSDZ2 on the way... andrea_104kg, could you provide some installation details for the final copper fin solution? I assume: - buy a copper sheet at home depot (gauge?) - cut to fit in motor slots - any glue/silicone between the layers to keep in place? - copper fins are simple long...