Recent content by q45denver

Thanks. That might work except it freewheels when I turn it clockwise. I may have to reinstall the chainring and see if that helps I guess.

Yes, It's a reverse thread and I may have over tightened it counterclockwise with vicegrips.

I got the motor out of the frame but still trying to get the nut off as shown in the attached photo. The silver one that says 35 N.M.

I just recently installed one of these in a new frame. I have also pulled and installed several of these in the past. Once the nuts are removed from the non chain (left) side, then the bolts just need to be driven out with a hammer and drift punch. I use a 1/4 brass shaft as my punch to make...

Yes the nuts are off

The long ones that attach the motor to the mounting shell on the chain side. I'm using a 5mm allen wrench. I may try an impact socket if I can find the right adaptor. There's nut on the other side of the bolts.

Just wanted to see if anybody had any suggestions. The motor on my AM1000 quit while I was riding it on fairly level ground and on a fairly cool day. The display powers on and shows no error messages and the battery is fully charged. The display shows it is putting out about 500 watts but no...