Recent content by quamau

My screen looks similar

Agniusm, I can confirm JBD-type boards do work for LiIon as well as for LiFe. Not only I am using two of them, one for 14s LiIon and the other with 17s LiFe. But when getting the 14s board by mistake I bought the LiFe version. It's only the default parameter values which are different: you just...

There is a post back in this very thread where schematics for every number of series connections are drawn (pictures too, if memory serves). Simple soldering job if you know what to connect and where to desolder. I did something similar to modify 16s in 17s. What is not that evident is that, if...

My bike uses since years a thumb throttle enabled through a 6-poles PAS. This was done via CAv3: pedaling is sensed but serves the only purpose to enable the throttle, thus keeping the bike legal (Europe): when pedaling stops the motor stops. Super-satisfied! Some time ago I updated the CAv3...

Same problem as serious_sam here: newest app version does not work on Android 9, older does. Is there an authoritative place to look at for app updates?

I am almost through this process, which I hoped would be smoother. After finding the right spots to desolder (informative pictures at p.37 of this thread), I had to (re)discover the fact that the new cells need recalibration, otherwise each cell is seen with a 25V voltage... This needs to be...

Yes, they do. Once you have a reliable source for good measurement, you can easily calibrate each cell (parallel string) individually via the PC software. AFAICT, this is not yet doable via the phone app.

Newsky256: yes, it's android app, link provided by eee perhaps one page back, it was a post on Dec 10

A little question for those using recent v.3.1.1013 of the xiaoxiang app. I find this new version very important, as it provides access to all the functions, including those which required the UART box (kinda impractical once the BMS is stashed away). But... I do not find anymore choice...

Hi folks, I'd appreciate a tip as to where to get a reasonably-priced 14s cable harness of decent quality for a smart JBD BMS: I am transforming one from 12s. I have ordered already from China but I'd like something that arrives here without too much of a wait. I am in Italy. Thanks for the...

Reporting my success and full satisfaction story with the satiator. After 10+ years of cheap chargers (that never failed but were noisy, difficult to regulate, slow, plasticky, etc) I have now a couple weeks experience with the satiator. It's a different world. The thing is indeed expensive...

A quick update on my little problem above: solved super-easily by controlling everything through the new app version (3.1.1013), works like a charm and allows to modify all the parameters which were only accessible via the PC program before. Many thanks to eee291 for pointing me in the right...

I kinda remember it was possible via PC, but this requires to reopen the pack. Can you be so kind as to show me how it can be done via app? All I can find is an option to switch from one sensor to the other on the dashboard... Under "Params setting" my app shows nothing related to temperature...

I am about to connect everything after installing battery pack on the bike, cabling etc. When I fire up anc connect the xiaoxiang app, by tapping on the lock on the dashboard, I see it switch from the "Lock" red circle status, which I set time ago while working on the board, to another state...

I am about to order a standard Cycle Satiator. Would some kind soul confirm to me that the programmer cable I already own for the Cycle Analyst is also good for the Satiator? Thanks in advance