Recent content by Rovii

Not to much news. Seat is ready but the rear swingarm looks horrible regarding the line from mainframe to rear wheel. Maybe there will come a new swingarm.

Today I had a live session via AnyDesk with Scott Drive (New Zealand). Scott Osborne updated the firmware of the controller, changed some settings for P/I and we tested different setups for the resolver calibration. So hopefully the shut down during full acceleration is gone now. I hope to test...

Met my sponsor @ High End music exhibition in Munich. Had a very good conversation and we already fixed the date when I will get a factory tour in Kiel 😀. Attachments

Let‘s hope it will work:

Made two runs, one with controller shut down and one without and new topspeed record but bad time

Tank cover is changed, 13“ notebook is installed, rear wheel cover is added. I also got now a sponsoring, so there will come a sticker on my fairing. Next step will be to update the battery circuit power cables.

Shorten the wheelbase and adjust the seat

Fixed it now on the main frame via two M10x60 screws. Maybe I will shorten the rear wheel position (-4“, -10cm)

Got back the seat

Change the stand dimension from 200/17“ to 260/21“

Changed to straight handle bar. It will be shorten, when everything works fine. Got also the around 130kW controller.

Little update

Yes, I got it. I ordered now the 961800 track version (129 kW). So it can handle up to 1350 bat amps and 1800 phase amps and they will return me 1100$. Will be enough for the 12kW motor to barbecue it 😉

Yes, I wanted to use Fardriver 962400. I already paid for it but today I got an email that the tests are struggling. They want to offer me now the 961800 track version. I am asking now for 1081800 track version to use 5x 6S Lipos in series. 6500mAh 100C, as I used in my other bike. Wanna go 5P...

Thanks a lot. Well I made a sketch before but I also know that sketch and reality will not match 100% at the end 😉