Recent content by ryanf55

Oh cool. Could you upload some new pics of the setup? Ever since Cyc Motor released the torque sensing bottom bracket, I've been more interested in the value of this motor of a cyclone.

I plan to do something similar, but saw your display is rotated 90 degrees. Is there an option to specify that in software or something so you aren't reading everything sideways?

I used a 3.3V arduino with the 4.5V line as RAW input. The controller still reaches max speed at 3.3V signal from arduino. I also have the jumpers on the motor set to high RPM, so there is a chance it isn't 100% speed, but it seems close enough. Here the latest picture of my display. I still...

That's easy:) So I got the replacement throttle hall sensor working. Had to use an Arduino to invert the signal, but it works alright. For whatever reason, the new sensor is very jittery, and makes the throttle jump around a bunch, so I implemented some mediocre filtering. Also, the controller...

How do you check the signals under load? The best I've done is tape the multimeter to the frame and ride it.

Hello, I was taking apart my Cyclone half twist throttle (going to redesign it), and one of the twist throttle sensor pins came apart. I can only read the 2nd line of text on it as "5030". Has anybody taken their apart, or mind posting a close up of the IC so I can order a new one? Edit: I was...

Thanks for the offer, but I was looking for where to get spacer bolts to offset a guard over the motor like in this one I found: To flat tire: I'll open the case up and look for a shunt resistor. I know there has to be once since the controller is measuring current somewhere. It displays...

Hello all, first post here on Endless Sphere. Two questions regarding the Cyclone Fat-Kit from Luna I've installed on my Fat-Bike... 1) Does anybody have a recommended way to install some spacers over the drive-side motor bolts to add a chain guard? I plan to cut my own guard out of aluminum...