Recent content by senoritoriver

Sounds like something my dad would ask! i came up with a cheap ebike kit and a ping or a kit from conhismotor.com although i havent seen reviews on conhismotor anywhere which worries me

It's true that the cost of lipo has dropped substantially. But the charging setups are still behind. Although in the next few years i see lithium batteries taking a big jump because of things like the nissan leaf.

After all the research i've put into lipo, it seems like they are designed for a different purpose. they have high discharge rates for short bursts. but i need range and ease of use. so lifepo4 seems like a better option for me. Safer, still pretty cheap, and long lifetime. the ping battery also...

It seems like Lifepo4 is best in terms of range, number of recharge cycles etc. but they are fairly expensive. I'm also confused on what you are trying for. Would you like to know what the best battery is? or would you like to prove that RC lipo batteries are the cheapest? Commonly used doesn't...

I have been looking into that same kit from conhismotor and it seems like thats the best way to go. you can get all the parts you need in the kit so theres no need for a parts list (which he requested earlier i believe) and you have lots of options. he can get a 48v1000w motor, a 48volt 20ah...

http://www.ebay.com/itm/24V-25A-600W-Power-Supply-110V-Input-Mega-Power-Hyperion-Charger-imax-icharger-/160773080055?pt=Radio_Control_Parts_Accessories&hash=item256ed283f7 any thoughts on this power supply? i like have a 110VAC input since thats the most common plug. i wouldnt have to find a...

the only downside to that bike is the aluminum forks. your conversion will have to be rear wheel now.

I hadnt thought about the fire issue... plus that 30 minute charge time from the hyperion EOS 1420i NET3 charger is quite appealing. is there are decently cheap power supply on the market that can put out the power the hyperion is capable of? haha

i intend to be in the 40mph+ club in a few years... (which really means in a few months) when i have some ebike experience and enough cash saved

i found an iMax B6 on amazon that can take AC power supply. Its only $28 plus a $7 12volt 5 amp cord. I'll be charging over night most likely so it's no problem if it takes a while. that may even put me below $600 if shipping from hobbyking isn't too much. i hope the starting project works. if...

the limit is 750watt to the road. so heres my list of parts: Trek bike (may have to get the disk brakes changed out) 48v1000w rear wheel ebike kit 4x 5ah 22.2v lipo packs from hobbyking premade series and parallel connections tips for the controller to make it match the pack a 6s...

Before i get started here are my parameters: speed: 15-20mph (without pedaling) Type: front wheel drive hub motor distance: 20miles Hills: downhill for the first 10mi and uphill for the last 10mi My weight: 150lbs Budget: $600 Legal constraints: 750watt max (but i'll risk 1000watt) My bike...

Could i just use this charger: http://www.hobbyking.com/hobbyking/store/__11170__Turnigy_4x6S_Lithium_Polymer_Battery_Pack_Charger.html each charging port will be connected to 2 battery packs wired in parallel. then when i put the pack back on the bike, and reconnect the series connections...

After riding a mountain bike today i realized i dont really want to go 45mph on a bike. that would be pretty scary. so i think i might start out doing a hub motor kit then maybe convert an enduro dirtbike into an e-motorcycle. plus i already have a title for it and it has lights, a horn etc.

So today im making about $800, and i want to start my ebike project! :D Where i live, i'm about 10 miles from my school, and the speed limit is 45mph. I'm pretty sure i can charge it when i get to school also if the charger isnt too large. But, after all of my research, i've come across one...