Recent content by szchz

hey fellow canuck, good motors except for the bug I've gotten. GL with your build they should be a good install if the frame is right.

Hi I have a tsdz2 sitting in my basement with a torque fault error, I've reflashed to OSF firmware encase it was a firmware issue and no luck. Is there anyone in the Vancouver area that does repairs on these motors?

yup, I can read/write no problem.

If I blew my controller, would that mean I can't program it? I forgot to unplug the battery when I cut some cables, sparks flew... my display doesn't work but how do I know if the controller is okay?

I am trying to wire my 850c to the battery harness, I cut the 850c on the display side (female) and wiring is different then the wiki (I think the wiki harness photo is from cutting on the male end. The wiring colors are different I have purple white green orange black I'm not sure what these...

There should be a noticeable change between 1 and 5. 1 is eco mode, 2 is touring and the other are more demanding on the battery and resulting is less work. From my understanding the motor design is built in a way that encourages you to work to varying degrees. Not sure if that helps but thats...

After slowly looking through the instructions I realised I made a significant mistake... I never wired the display to the TSDZ2. My 850c display came working with the motor. I'm somewhat unsure as to what to do, because from my understanding from most sellers they don't sell the 850c display...

I managed to fix my display, I installed the 1.0 firmware on both the display and motor. I am getting error breaks message on my 850c. I'm worried I may have hastely installed the TSDZ2 firmware and the data memory/option bytes are wrong. I saw from a previous post it means there is no...

Thanks I think I'll try that. I found the cable on Alibaba...

I'm trying to flash the firmware on the 850c display and I am having difficulty, I'm hoping I can get some advice. My order for eunorau came with a USB cable that with a male to male dongle connects to the display. See: I plugged it in and I was find the COM in the Apt-burn-tools, opened the...

Cheers. Yup, great value, its been a treat thus far.

waynemarlow: those are all awesome and actionable tips that are simple enough to do, I'll mainly be doing commuting (intention is for it to be a family grocery/day care/ day trips bike), at this point I don't plan on taking it off road or in waterlogged conditions so hopefully it lasts. I read...

Do you have any recommendations for reducing this risk? I live in the Pacific Northwest. Maybe some sealant around the engine case ?

I've seen some references to this generally. What constant power output is sustainable without overheating in ~ 20 degree ambient temp (my motor gives ~800 wats peak) ? I'm anxious about the motor on hills without a thermometer installed. I was thinking about dialling down the amperage, any...

Here is my problem. The BB of the motor won't slide through as the cupping from the engine around the bracket stops it from going in. Any advice? One possible solution is to open the case and, slide it through and try to tighten the case once its on, I don't think that'd be enough, it may need...