Recent content by thowaa

Some of my thoughts about the TSDZ2... Regarding feel: The torque sensor is certainly more than just an on/off switch. I find it to be a big difference in the cycling feel between the TSDZ2 and Bafang BBS01. But, the torque sensor is not like a linear throttle. I have been told that the logic...

Brake handles with power-off switches are optional with the VLCD5. You don't really need them.

Might be the same as the Korean Greenwheel version... :) https://endless-sphere.com/forums/viewtopic.php?f=3&t=84958

The mid motor looks like just another rebrand of the TSDZ2 discussed here: https://endless-sphere.com/forums/viewtopic.php?f=28&t=79788

Interesting. I have wondered if the split cable found in the parts list can be used for lights?

Check this thread about the TSDZ2: https://endless-sphere.com/forums/viewtopic.php?f=28&t=79788

Just found that Ruff Cycles has made a new retro-style eBike with the Bosch CX. http://www.ruff-cycles.com/ruffian Looks good, but it is too pricey for me.

Any reason to believe that the XH18 display is made by anyone else than Tongsheng who makes the TSDZ2 motor?

Yes, I guess that is correct. The indicator shows full until I get Vmin below 36V, then it seems to drop one bar per 1V down, but the voltage goes a bit up and down dependent on load. According to the motor data sheet there is a protection shutdown at 29V. I haven't run until that happens, and I...

Which assist level do you use? Any others that can confirm the reduction to 8A?

Thanks to everybody sharing more info. As I understand this, it just relates to the LCDdisplay. There is no guarantee that that the motor and controller will accept 60V.

Any news? :)

The big chunky VLCD5 display comes with a button extention you can place next to the grip. My local dealer has the XH18 and I have had a look at it. I like the smaller display, but I think I had prefered +/- buttons instead of the twist grip. Other things to note is that it is not possible...

No, the only thing that differs between the regular 250W and 350W versions is a software config. The controller is the same. If you measure max current at your 350W it will probably be 16 A. I have been told that it is possible to get versions that allows changing of the A setting. Max 18 A...

Here is my Switchblade: