I already tried the setting on page 3 with 0% but it still does not work.
This used to be the regen brake when using the mechanical brakes and activating the "high brake" signal but that does not work either.
Regen seems to be "always active".
This is what page 4 shows
Finally i made it.
Took me nearly a million trial and errors but finally the motor is running smooth.
I am not even sure what exactly the problem was.
Only thing left is i still could not figure out how to deactivate the automatic regen.
QS Just told me that according to the videos this is no QS Motor.
So it seems to be somethin else but i have no clue.
The Bike ist this one: https://urbet.es/producto/gadiro-e-125/
and it looks a lot like this one : http://www.rotom.cn/ray
also the COC certificate say this is a: "ROTOM GYD2000-A"
No i havent tried to ride it.
When reconnect my old EM-50 the Motor runs with much less noise and no clicks or cutouts even at 1300rpm.
So i'm pretty sure something still needs to be optimized.
First of all thanks for the advises.
I am aware of the different Hardware and Software configurations, i read about it.
I just tried your parameters - but it does not change anything. The motor is still running pretty rough.
Here are some short clips i made to show the behavior:
Clip 01 - i...
Hello dear members,
i read a lot here in this topic and learned even more but i still cant make my EM-150 working properly.
I have got a 3000W QS Hub Motor (V2) with 28 pole pairs powered by a 72V 2 x 35Ah Battery.
The Bike was delivered with a VOTOL EM-50.
I tweaked some of the parameters and...