Recent content by Weissnix

  1. W

    TSDZ2 OSF for all displays, VLCD5-VLCD6-XH18, LCD3, 860C-850C-SW102.

    BTW: I found the displays for the 850c/860c-they are mounted on the pcb: https://de.aliexpress.com/item/1984270730.html
  2. W

    TSDZ2 OSF for all displays, VLCD5-VLCD6-XH18, LCD3, 860C-850C-SW102.

    ´Buy a 860C. 67 Euros to Germany, all incl. I had a VLCD5 in spare. It works, kind of... No temp of the motor, no graphs of speed etc. Really terrible against the coloured screens. And the soft of the 850/860 is newer. But it seems that Mbrusa found a solutuion for the last point. Which is...
  3. W

    TSDZ2 OSF for all displays, VLCD5-VLCD6-XH18, LCD3, 860C-850C-SW102.

    I bought the same 860C as The_Ball and will solder it on my own. As the pcb from my 850C is still working, does someone know where one can buy displays? It is the ILI9481 driver, right?
  4. W

    TSDZ2 OSF for all displays, VLCD5-VLCD6-XH18, LCD3, 860C-850C-SW102.

    I need a new Display, my 850C has broken :mad: So i can buy a 860c Bafang uart version, right? But they have other connectors. My old 850C had a 6 pin connector (male), an my flasher has the counterpart. So how can I connect the bafang uart display to my motor and flasher?
  5. W

    TSDZ2 OSF for all displays, VLCD5-VLCD6-XH18, LCD3, 860C-850C-SW102.

    I have here a brandnew controller but it is just a spare part. Last week, I tried to flash. It worked only on the 5th attempt. The 4 wires going to the speed sensor (our programming cables) were not soldered correctly. I have soldered some pins instead of the cables and than I soldered the...
  6. W

    TSDZ2 OSF for all displays, VLCD5-VLCD6-XH18, LCD3, 860C-850C-SW102.

    Thank you mbrusa:) The new version works fine with a 850c (2021 Version)
Back
Top