Recent content by zekill

  1. Z

    new cyclone 3000 w mid-drive kit?

    Hi all, I must order bearings for isis BB in my 3000w kit. Can someone have reference and numbers in this BB ? In my mind it's three bearings but i don't have reference.
  2. Z

    new cyclone 3000 w mid-drive kit?

    Anyone is familiar with android phone ? i have install the cyclone0926.apk (downloaded on cyclone website) on a xiaomi redmi 7A and app stay in chinese language. I have try to switch to english in app without success.
  3. Z

    GNG big block kit

    6201 and 6203 are the two motor bearings, 2RS version (sealed). I don't have ref for the five reductor bearing. in Europe we use SKF or SNR brands.
  4. Z

    GNG big block kit

    so finally, it's the rear motor bearing that doing noise, the front loose grease too. I change there with branded gearing and no noise. I thing to changing the five reductor gearings too ...
  5. Z

    new cyclone 3000 w mid-drive kit?

    thank for reply. i have open the motor, all is in place and dry. I seem that the rear bearing (6201) is fautly.
  6. Z

    GNG big block kit

    hi all, my C-3000 have just about 300 miles and make a mechanical noise ... but work normaly. I have pull out gearings and the noise still present. it's seem that the front motor bearing not have play. Anyone have this issue ?
  7. Z

    Vario downhill bike mid-drive conversion

    i have try the bike today. need a little work to finish it. battery is 16s7p Sanyo GA, splitted in two parts.
  8. Z

    cyclone fan MOD 4800 watt motor and Gt it1 frame

    it seem that the primary chain, the pink one, is in the wrong way.
  9. Z

    Vario downhill bike mid-drive conversion

  10. Z

    Vario downhill bike mid-drive conversion

    custom motor clamping is done. I weld a plug with M6 tap below the down tube so it's invisible. Now waiting for battery pack, chain and chain tensioner.
  11. Z

    7s8p x2 good or no ?

    thank for reply guys. Do you know someone who can build them in europe ?
  12. Z

    7s8p x2 good or no ?

    Hi all, I need a custom battery for my build. Is it a good setup to build two 7s8p like this and connect them in serial with one bms to make a 14s8p battery ? I don't have enough space in my frame so plan is to put packs on the sides.
  13. Z

    Vario downhill bike mid-drive conversion

    this is the left motor mount that i'm start to build. it's a 3mm sheet metal.
  14. Z

    Vario downhill bike mid-drive conversion

    I think your frame is better than mine for put a battery before tube, especially with hub motor. your bike is beautiful :)
  15. Z

    Vario downhill bike mid-drive conversion

    yes, i made a mistake when i write it. so, is it a bad thing to build a pack splitted like 7s(X)p x2 in serial with one BMS ?
See more
Back
Top