I will explain why i need this switch.
I have two batteries connected in series and controller.
Currently I am using mass breaker to disconnect batteries from controller when bike is left.
But when i need to charge the batteries i have to disconnect each battery manually and connect to charger...
Hello,
I need a toggle switch to switch between ride/charge mode.
So the main circuit should be breaked.
I need 50A three poles double throw switched.
I can't find one.
Maybe anyone knows?
Thanks,
I will use this topic to post temporary search results of a perfect connector.
Currently found this manufacturer.
Phoenix contact
https://eu.mouser.com/ProductDetail/Phoenix-Contact/1605520?qs=sGAEpiMZZMvlX3nhDDO4AI8icSTniQBiRb1Gx3EKBJw%3D
This connectors is cheap enough although has some...
Hello amberwolf
Thanks for reply.
My message was a bit incorrect.
I was meaning that it would be nice to find a connector which would be possible to bolt to a case.
Here is the illustration
I marked with red circles the holes for bolts.
My controller and batteries are in a wood case (custom...
HEllo E-HP and thanks for reply
This solution is very good.
I will leave this link for myself to find it
https://www.higoconnector.com/products/l1019dg-p-00-bx-1000/x099K#title
I will order this and test.
It would be ideal to find something similar but with ability to attach it with bolts to...
Hi All,
I want to disconnect motor from controller with just one plug.
So this plug should contain high current pins (phase) and low current pins (hall sensor).
So generally it must have 3 + 3 + 2 + 1 = 9 pins or more
And phase pin should be more that 50A DC rating.
I made a quick search...
Hello again and thanks for reply
I have checked all 36 combinations with ampermeter.
I found that there are 3 combinations for which noise is the lowest, easy start and current at the full throttle is 1.8A.
Now i can't distinguish between these combinations.
I guess they are equivalent but not...
Hello everyone,
I have HT3525 motor from crystalite-europe.com. I want to connect it to Lyen controller.The problem is the pinout.
Lyen controller has the following pinout:
YELLOW - A phase
GREEN - B phase
BLUE - C phase
Motor has pinout:
YELLOW - 1 phase
GREEN - 2 phase
BLUE - 3 phase
Does 1...