Search results

  1. waynebergman

    Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

    HI Damienhatty, glad you are getting an X1. I am sure you will be happy. Regarding the CF rims I dont know if I would spend the extra money especially if you are wanting a bike to do the sustained 30mph for commuting. If you end up tricking the bike out to do the sustained 30mph who cares if...
  2. waynebergman

    Bafang M500/M600 thread

    HI Herskerhans, any chance of sharing some photos or details on how your throtle solution got resolved.
  3. waynebergman

    Bafang M500/M600 thread

    Towards the end of the third page on my thread here https://www.endless-sphere.com/forums/viewtopic.php?f=28&t=96461&start=50 shows my limited understanding with how the wiring harness works with the conections and cables supplied from Dengfu work. Keep in mind this is way back when the bike was...
  4. waynebergman

    Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

    HI Troyp, the seat tube is an uniterupted design. Goes straight all the way down to the motor mount so max insertion length is longer than you would ever need, don't worry about that at all........wayne
  5. waynebergman

    Bafang M500/M600 thread

    Thought I would chime in here with a 1500 km update on my M600. I am an early to the party user so I still have the original spec plastic gear but I am light in weight and just running the stock controller with around 850 watts so all is well and I am very happy with with this drive. Very quiet...
  6. waynebergman

    Bafang M500/M600 thread

    MAGNET ON CRANK ARM AND SENSOR SOMEWHERE TO MEET ITS PATH OF TRAVEL....not pretty but should work, oddometer of course will be all wacky but small price to pay for the benifits I guess
  7. waynebergman

    Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

    Good point speedmd on the motor reduction, good thing I have a throttle :) but your are right in regards to the PAS part of the equation but I think I still have a valid point on the short shifting especially if you have and use a throttle.
  8. waynebergman

    Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

    HI Tom, Watts equals your amps x volts . Power as you state comes from your Watts but the TOP OUT Speed per gear(providing you have enough amps for the situation) comes from volts. So in some circumstances like a super steep big hill one might not be able to reach the max speed of the motor...
  9. waynebergman

    Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

    Hi 'Tom, yes points taken. :) Sorry for being a snob regarding my take on the looks of the bike. I just think if someone goes comercial with a build it might as well be awesome. Home builds are totally differnt and are actually kind of cool when they show the make do approach, sometimes the...
  10. waynebergman

    Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

    HI Speedmd, yes I am still a big believer in the M600. My long winded reply at the top of page 12 in this thread tells the story on how to get smoothness out of the system. I have that now and its working well. Regarding the ultra I do like the idea of the lighter weight I am running on my M600...
  11. waynebergman

    Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

    HI Tom, please no worries at all about cluttering up the thread. Its good to get comparisons on the different drives especially when comparing to the M600, give us all a place to learn........wayne
  12. waynebergman

    Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

    HI Gizzygone, the torque pedal assist works fine, can not compare it to the other drives as all my other experiences are with older versions of shimano motors etc but the issues for smoothness can best be described from the text I will paste below that are more related to working the system with...
  13. waynebergman

    Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

    HI speedmd, the fatty you have shown looks nice but the steer tube angle looks a bit slack in relation to seat tube angle. To me the 9000 watts or so from the M600 drive is just is not enough to push a fatty around for what it i ment to do. If one just has to have a fatty then go for it I guess...
  14. waynebergman

    Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

    HI Gizzygone, I have a fat tire bike and its fun. Was a novilty riding in the snow and open desert but in reality the 27.5 x 2.8 tires on my Dengfu is such a better choice in every way unless you are plowing throw super deep snow and if that is the case you may need a peppier motor than the M600...
  15. waynebergman

    Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

    HI Gizzygone, when you ask ----- "No issues with anything? I’m finding communication to be very slow (not just because of the time-difference: because if I send more than 3-4 questions at a time I don’t get a response)" I was not addressing any thing to do with customer service,as your...
  16. waynebergman

    Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

    Hi Gizzygone, yes the frame is holding up fine. The bike is a winner.
  17. waynebergman

    Bafang M500/M600 thread

    Thanks Illegal for posting this info on the crank arms. Ouch, that web site says 38 bucks to ship to USA. I did not bother to add the second arm to the cart after seeing the high shipping cost. I will try my luck end of March when I am back at my shop and re drill and re tap to get an...
  18. waynebergman

    Bafang M500/M600 thread

    Great news that a few users are having success with a 14 s 52v packs. Please keep us posted as time goes on as to how the controller lasts with the higher voltage running through it. When these drives were first released there was a lot of miss information regarding the higher voltage and if...
  19. waynebergman

    Bafang M500/M600 thread

    And also kite_rider, as mentioned you need a decent throttle for this to work and be comfortable. Give it a try with what you have but if you see it as a work around for yourself you need to take the next step and wire in a decent throttle.
  20. waynebergman

    Bafang M500/M600 thread

    Hey Kite_rider.... Regarding the programing I think the one main thing that would really help especially if you are running a throttle is if the M600 would work like the HD1000 in the way you can have max throttle overide any low power setting you are running for you pedal assist. If you dont...
  21. waynebergman

    Bafang M500/M600 thread

    what about this idea of sensor magnet on crank arm and sensor relocated on chains stay to pick up the signal from the crank arm magnets instead of from the wheel revoltions. I would think the effect is like tricking the sensor to be thinking the wheel is spinning much slower than it actually...
  22. waynebergman

    Dengfu E05 and E06

    HI "Radiorental", "EDIT SORRY I HAVE DELETED SOME STUFF I POSTED IN THIS POST AS I JUST REALIZED YOU ARE GETTING THE M620 NOT THE M600 DRIVE" I hope with the 4" x 26" tires you still get some how a decent chain line, I am sure Dengfu has this worked out but keep us posted. Good luck with it, I...
  23. waynebergman

    Bafang M500/M600 thread

    Way to go "ilegel" I am just a couple of months behind you on this move. I have my L & R taps for the job but waiting until I get back to my shop in Canada to tackle this project, I am in Arizona now until end of March. Looking forward to hear how it all goes for you. I think 152mm is a great...
  24. waynebergman

    Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

    Here is a tip from a friend of mine that know's of a person that put the speedo magnet on the crank arm and then rearranged the speedo sensor on the chainstay accordingly to bypass a controllers low speed limiter setting. This was not done on the M600 but on a different drive but should work on...
  25. waynebergman

    Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

    HI Naga, welcome to the club. Glad you have your M600 on the trail. A couple of questions for you please...... 1. Good going on the home built Battery pack, did you go 48 volt or 52 volt? I am assuming 48 Volt 13s. (EDIT YES I SEE NOW FROM PREVIOUS POSTING YOU ARE AT 13S 4P) 2. You have...
Back
Top