Search results

Date Relevance Most replies

  1. L

    PAS Works In Both Directions

    I have a cheap cadence PAS and a cheap chinese controller. The PAS I'm using comes with a disc that has 8 poles. Everything was working fine until I changed my hub motor from a 200W to a 1000W motor. Before, when I pedal forward, the PAS kicks in after one crank rotation and the motor runs...
  2. L

    Need to Pedal Extremely Slowly for PAS to work

    I tried a different PAS sensor, it's a smaller sensor with only one hall sensor (just found out that the original one has 2 hall sensors), and everything seems to work fine, using 8 poles and the motor kicks in after 1 crank rotation and I can pedal at any speed I want. I guess the PAS with 2...
  3. L

    Need to Pedal Extremely Slowly for PAS to work

    I’m using a Chinese controller that I bought on aliexpress. Doesn’t seem to have any programming wires on it. The controller that I’m using is similar to this one.
  4. L

    Need to Pedal Extremely Slowly for PAS to work

    I’ve reduced the number of magnets on the disc to 12 by poking half of them out. I now don’t have to pedal as slow for the motor to kick in but it’s still slower than I’m comfortable with. I feel like I have to pedal at a specific RPM, any slower or faster and the motor shuts off. Is that how...
  5. L

    Need to Pedal Extremely Slowly for PAS to work

    It's similar to this, but the disc has 24 poles.
  6. L

    Need to Pedal Extremely Slowly for PAS to work

    I installed a cheap 24 pole PAS I bought from aliexpress. When I pedal the bike at a natrual cadence, the motor does not spin. I have to be pedalling unnatrually slow for the motor to start spinning. Then it works perfectly, just that I have to pedal at this slow cadence. Any faster and the...
Back
Top