Search results

Date Relevance Most replies

  1. deano

    Replacement Slide Carrier for Battery

    Anybody please, know of were to get a Replacement Slide Carrier for this type of Battery.? The type of carrier that can use the water bottle screw holes https://goo.gl/photos/WEfyGhVF4JHSEjM26 In the UK.
  2. deano

    Chip Blowing in Controller when under load.

    Have tried other battery. System does exactly the same to this battery. The motor checks out OK. So going for the new controller. Please can you send me links for the nicer Controller and LCD? so I can get it ordered. Thanks
  3. deano

    Chip Blowing in Controller when under load.

    Have retested the motor and others as of http://www.ebikes.ca/learn/troubleshooting.html. This is what is happening. Connect everything. All lights up OK. Can push the bike around all OK. As soon as load is applied LED goes out whole system is dead. The light indicators on the battery show...
  4. deano

    Unknown Contoller

    Thanks d8veh for the heads up on BMSBattery.com. "Time don't matter" The controller https://bmsbattery.com/ebike-kit/695-s06sc-sine-wave-controller-for-central-motor-ebike-kit.html. It going to be so much better for the little lad, as being a "Sine Wave Controller" will give him more torque...
  5. deano

    Unknown Contoller

    What you on about? Just said I am in the UK for anybody recommending a Throttle and LCD I should purchase
  6. deano

    Unknown Contoller

    Have connected as picture. Nothing happening. I dont think the throttle is working as tested using method http://www.ebikes.ca/documents/ThrottleTesting.pdf and got no increase in Voltage I think before I continue I will order Throttle...
  7. deano

    Unknown Contoller

    Have acquired a E-Bike Kit. Going to put on my sons suspension mountain bike. Can you tell me what the connections are that have no name against them or a PDF to the controller please.? It is made by MXUS the mode numbers are scuffed but can make out ??36zws xfk075 I have only...
  8. deano

    Chip Blowing in Controller when under load.

    Gone right through your checklist. (many thanks for it) Still popping them two output moffits. ( Waiting for new batch) Everything checked out. Noted the battery is not regular. Example can show 36v then down to 18V. Getting proper surges going on. I think its "spiking" and is not regular It...
  9. deano

    Chip Blowing in Controller when under load.

    No. That was a totally different bike and problem. Thanks to this forum is now sorted.
  10. deano

    Chip Blowing in Controller when under load.

    Have a commercial built Wisper 905e Electric Bike. A month ago it started to blow the 20amp in the battery pack as soon as you turned it on. Local electronics store has now eliminated the blowing of fuses. The problem now, is that you switch the bike on, all is fine until you start to rev...
  11. deano

    9 FET INFINEON CONTROLLER. Blown

    Thanks for the Tips Chaps.. Tested all the spokes. Took Hydraulic Caliper off and run it.. Noise is still there. Proper "gutted" Got to be a Magnet dropping?. Have rode daily since issue. so will live with it. Strange thing though. If noise is there and I shut off and then wack throttle...
  12. deano

    9 FET INFINEON CONTROLLER. Blown

    Its is a constant "click click click" Then disappears when peaking out.
  13. deano

    9 FET INFINEON CONTROLLER. Blown

    Thank you so much for your advice.. Found that short and would not of looked for one if it was not for you. So she is up and running. The problem I have now is noise coming from the Motor (a Mac) http://em3ev.com/store/index.php?route=product/category&path=40. It sounds mechanical...
  14. deano

    9 FET INFINEON CONTROLLER. Blown

    Controller is at electronic shop, but have checked with photos of a 9 FET INFINEON CONTROLLER and is very similar. I need to know why? before I connect the battery to the fixed controller what is popping it. Someone has mentioned "The Battery Management System in a battery can trip when you...
  15. deano

    9 FET INFINEON CONTROLLER. Blown

    Thanks for the link. That sure is going to help. I will check for shorts, but all I had connected to controller was the battery pack. Can not see any burnt parts in Controller. Will also check polarity of battery. It just seems strange that all was good till I recharged the battery. Could...
  16. deano

    9 FET INFINEON CONTROLLER. Blown

    I have two 9 FET IRFB4110 INFINEON CONTROLLERS from http://em3ev.com/store/index.php?route=product/product&path=38&product_id=80 that have blown. Please can you supply links or details to Schematics and the method to work through to get them working again? The reason they have "popped" I have...
View older results
Back
Top