Search results

Date Relevance Most replies

  1. N

    LightningRods mid drive kit

    I'm not Sure thicker sheets is the best solution for further production kits,but it will probably work it will be kinda heavy and it's not ideal placement of material for good strength to weight ratio. This is a case where adding thickness isn't as effective as adding a web. Two plates...
  2. N

    LR specialized sx trail build

    Its just regular wire first i put heat shrink over the wire wrapped it around a broom stick then hit it with a heat gun this makes it stay in the coiled form. then i got woven wire loom (http://www.cabletiesandmore.ca/ExpandableSleeving.php) and put it over the heat shrink and fixed it on either...
  3. N

    LightningRods mid drive kit

    Now that I've brought my kit up to full power (2400W), i have also noticed the twisting that jdevo2004 has shown in the pictures. I was planning on boxing in the upper sheets after i straighten them by welding a cross brace fixing the two plates together increasing there section modulus...
  4. N

    LightningRods mid drive kit

    I found the kit fit extremely well on my bike with only minor modifications and i haven't had any major issues so far. I too noticed that the pant guard rubs a little on the bolts but nothing a rotary file couldn't make short work of. The slop in the free wheel bearing seems to be the cause of...
  5. N

    LR specialized sx trail build

    Some pics of my backpack battery setup The battery is 6 3s2p 8400mah liFe cells run in series for 60v it comes out to about 500 w/hr, I hard wired them as three 6 cell batteries with 3 balance plugs so i can balance charge the whole pack at once.The backpack is a ogio mach 3 and is rigid...
  6. N

    LR specialized sx trail build

    Wiring is all done just need to finish the mount for my cycle analyst and connect it to my motor controller.
  7. N

    LR specialized sx trail build

    Have all the major mechanical components set up time to start on the wiring. The modified chain guide fits and works well un-powered. Still waiting on a 219 chain breaker.
  8. N

    LightningRods mid drive kit

    Here is what i'm using on my bike it requires a bit of modification but seems to fit the only issue are the nuts for holding on the 219 sprocket and guard they interfere need to find something a little more low profile
  9. N

    LR specialized sx trail build

    Component list: 2012 Specialized SX trail Lighting rods mid drive kit Power Pole connectors 10 Ga wire ebikes.ca: controller, throttle,CA-DP plugs, and Cycle Analyst Hobbyking: Batteries, 6 8400mAh 3S2P 30C LiFePo4 + charger Total cost:$3700 including the bike Here are some pictures of my...
View older results
Back
Top