Search results

Date Relevance Most replies

  1. C

    Bafang M500/M600 thread

    The Can connector can be connected in parallel. It can be connected to one of the three motor cables, all three have CanH and CanL. We can leave the original display connected and add this card to have an ANT + and BL connection. I would add a button to change the maximum speed on the fly.
  2. C

    Bafang M500/M600 thread

    Look on GitHub, there is all the information we know. https://github.com/OpenSourceEBike/Bafang_M500_M600/blob/main/Hardware/Board/Bafang%20M500_M600%20Connectors.pdf
  3. C

    Bafang M500/M600 thread

    The BESST hardware update is implemented
  4. C

    Bafang M500/M600 thread

    This BESST function has never been implemented, it uses local files and downloads the firmware from github. https://github.com/OpenSourceEBike/Bafang_M500_M600/tree/main/Firmwares/Official/Motor
  5. C

    Bafang M500/M600 thread

    ID: 02F83200 Numbers Byte: 8 % Battery Byte 0 : 50%(32Hex) = 32 Byte 1/2/3 : 00 00 00 Byte 4 : EE Byte 5 : 02 Level Byte 6/7 : 0 = FF FF / 1 = 40 1F / 2 = 2C 1A / 3 = EC 13 / 4 = AC 0D / 5 = 8C 0A ID: 02F83201 Numbers Byte: 8 Speed Byte 0/1 ...
  6. C

    Bafang M500/M600 thread

    With any battery
  7. C

    Bafang M500/M600 thread

    With CAN protocol, voltage and current have a definition of 0.01 units.
  8. C

    Bafang M500/M600 thread

    With Can protocol, the controller sends current, voltage, speed, battery voltage, battery %, controller temperature and motor temperature in real time.
  9. C

    Bafang M500/M600 thread

    We all know the Can commands to read data from the controller and to change speed and wheel diameter, so if the display can read and write Can commands, it is possible to do everything, in theory even loading the firmware. A button can be set to change top speed from road at off-road.
  10. C

    Bafang M500/M600 thread

    The torque sensor calibration must be done empty, without any weight.
  11. C

    Bafang M500/M600 thread

    The Bafang M series due to the closed firmware, allows very limited settings, maximum speed, wheel circumference, wheel diameter and calibration of the torque and motor speed sensor. You can use BESST or CAN interface, but the parameters that you can set are the same. In the case of the torque...
  12. C

    Bafang M500/M600 thread

    1-There is no mac version 2-https://endless-sphere.com/forums/viewtopic.php?t=100777&start=410 3-For the moment it is not possible to update the firmware with this interface.
  13. C

    Bafang M500/M600 thread

    You have installed a 43V firmware on a 48V system, so the battery percentage is wrong.
  14. C

    Bafang M500/M600 thread

    As far as i know, the can protocol is unified for all bafang motors
  15. C

    Bafang M500/M600 thread

    With the latest firmware the M600 motor works well in all PAS positions.
  16. C

    Bafang M500/M600 thread

    What kind of help do you need?
  17. C

    Bafang M500/M600 thread

    The connector is probably inside the frame of the mtb
  18. C

    Bafang M500/M600 thread

    Can you send photos and model of the display?
  19. C

    Bafang M500/M600 thread

    If you have the BESST interface, you can update the firmware. https://github.com/OpenSourceEBike/Bafang_M500_M600/raw/main/Firmwares/Official/Display/DPC241CI10202.3.bin
  20. C

    Bafang M500/M600 thread

    30.00km/h = BB8hex = B8 0B If you get it wrong, if they are admissible, it accepts them, otherwise it doesn't. You can always send them correct. Correct ID is 05, but if you use Innomaker interface, it wants 85
  21. C

    Bafang M500/M600 thread

    If you use the usbtocan innomaker interface, follow the guide faithfully, I don't know why, but ID must start with "8" and not "0" When you send the configuration frame, it must be complete with all the required parameters. Pay attention to the communication speed which must be 250
  22. C

    Bafang M500/M600 thread

    The Hugo connector is located along the display cable.
  23. C

    Bafang M500/M600 thread

    I asked Bafang for the latest firmware available for M600 48V and they sent me this. Compared to 46.6 the differences are negligible.
  24. C

    Bafang M500/M600 thread

    Bafang's service, but I don't always answer.
  25. C

    Bafang M500/M600 thread

    Latest Bafang M600 48V firmware
Back
Top