Search results

Date Relevance Most replies

  1. C

    Bafang M500/M600 thread

    This is a typo, it is not compatible with M600.
  2. C

    Bafang M500/M600 thread

    I have been using an MTB with an Bafang M600 motor since July, and I have just crossed 5000km. For the moment the motor works well, indeed now it is quieter and with freer pedaling. I am evaluating any maintenance to be done, do you have a list of all the bearings mounted?
  3. C

    Bafang M500/M600 thread

    It is a problem of the "innomaker" software, you have to close and open it several times to make it work.
  4. C

    Bafang M500/M600 thread

    You cannot download the firmware. To return to the previous firmware you must have the relative file.
  5. C

    Bafang M500/M600 thread

    Eplus is paid alternative software. To achieve the same result, we can use BEEST without an account or a free CAN interface. The motor parameters depend on the controller firmware, until someone produces an alternative firmware, there will be no other parameters that can be changed.
  6. C

    Bafang M500/M600 thread

    A Bafang technician told me. The sensor magnet should be in the lid.
  7. C

    Bafang M500/M600 thread

    Unfortunately for the accelerator there are no settings that can be changed, everything is configured by the firmware. It would take some expert for decompile the firmware to perform all the settings.
  8. C

    Bafang M500/M600 thread

    The torque sensor calibration must be done in case of sensor replacement. The speed ​​sensor calibration must be done if you open the motor cover.
  9. C

    Bafang M500/M600 thread

    Exactly, there go two male and female cables connected in parallel, one connected to the display, the other connected to the controller. Follow my instructions and you can't go wrong.
  10. C

    Bafang M500/M600 thread

    Yes, this is the latest firmware available for M600 motors with 48V battery. It removes many defects in the previous firmware. To install the BESST interface is required. Remember to rename the file to ".bin".
  11. C

    Bafang M500/M600 thread

    To use the BESST interface without having a Bafang account, follow these instructions:
  12. C

    Bafang M500/M600 thread

    Unfortunately the torque sensor settings are in the firmware and cannot be changed. Improvements are made by changing the firmware, but the BESST interface is required.
  13. C

    Bafang M500/M600 thread

    You have to do it with the display on, press the send button while the lines scroll. Look closely at the bus speed setting, 250kb. Check the set speed on the display information page.
  14. C

    Bafang M500/M600 thread

    Exactly Actual configurations: 28 0A = A28Hex = 26km/h 60 01 = 160Hex = 22" C2 06 = 6C2Hex = 1730mm New configurations: 70 17 = 1770Hex = 60km/h 60 01 = 160Hex = 22" C2 06 = 6C2Hex = 1730mm
  15. C

    Bafang M500/M600 thread

    You need to use your device's software and it should work. Search here: https://github.com/SeeedDocument/USB-CAN-Analyzer/tree/master/res/V7.20 Let me know if it works. It could be better than the innomaker interface.
  16. C

    Bafang M500/M600 thread

    Look on this site: https://flx.bike/products/controller-dz-multi
  17. C

    Bafang M500/M600 thread

    You could try with the CAN analyzer I posted. With that you immediately understand which component is not communicating.
  18. C

    Bafang M500/M600 thread

    M400 is CAN, I believe there are no problems.
  19. C

    Bafang M500/M600 thread

    To configure the Bafang M500 / M600 motor without using the BESST programmer, you can use this interface. Link interface USB to CAN on Amazon: https://www.amazon.co.uk/USB-Converter-Module-Raspberry-Zero/dp/B07Q812QK8/ref=sr_1_2?dchild=1&keywords=usb+to+can+innomaker&qid=1604409709&sr=8-2 Link...
  20. C

    Bafang M500/M600 thread

    With the 43V firmware the current is set at 20A instead of 18A, this means more power but also more overheating and battery consumption. Level 1 is already high and level 3 is already at full power. The percentage marked on the display remains at 99% up to approximately 75% of battery...
  21. C

    Bafang M500/M600 thread

    I downloaded it from the Luna forum. I have already loaded it on my motor M600 and tested it. They seem to have solved the jerky operation problems.
  22. C

    Bafang M500/M600 thread

    The link doesn't work, can you post the file directly? Just rename it ".txt"
  23. C

    Bafang M500/M600 thread

    The assist levels are in the firmware, they cannot be changed.
  24. C

    Bafang M500/M600 thread

    I used this fairly expensive analyzer because I already have it, but I was evaluating can to bluetooth interfaces for automotive use. I'll try to buy one and do some tests. On amazon I found this low cost device, it should work...
  25. C

    Bafang M500/M600 thread

    I have a can analyzer and I connected it between the BESST and the controller to view the data traffic that is exchanged during the configuration phase. I discovered that a single telegram sent by my analyzer is able to configure maximum speed, diameter and wheel circumference without any kind...
Back
Top