Search results

Date Relevance Most replies

  1. C

    Bafang M500/M600 thread

    When I ordered the frames in January, with M500 they gave the DP230 display with integrated keys, with M600 DP240 with separate keys. I asked if variants were possible and they said no. I ordered the motors from CNEBikes who supplied them as I wanted, DP241 Bluetooth, light cable, brake cable at...
  2. C

    Bafang M500/M600 thread

    All settings depend on the firmware not on the BESST interface. For M500/M600 these are the only ones available. For other models, however, more settings are available. It would take someone experienced to decompile the firmware and unlock all settings.
  3. C

    Bafang M500/M600 thread

    You can follow this procedure: For installation python: https://phoenixnap.com/kb/how-to-install-python-3-windows For installation pip from Python: python get-pip.py For installation simplejson from Python: pip install simplejson
  4. C

    Bafang M500/M600 thread

    For the firmware of the M600 motor I made a request to Bafang technical support service@bafang-e.com. You can make a request by communicating the model and serial number of the motor.
  5. C

    Bafang M500/M600 thread

    I enclose the firmware for M600 43V from August 2020 and the firmware 48V from November 2019. I think the 43V is better than the 48V even in a 48V system.
  6. C

    Bafang M500/M600 thread

    Remember to add the text 127.0.0.1 test.api.besst.bafang-service.com to the host file in the folder C:\Windows\System32\drivers\etc
  7. C

    Bafang M500/M600 thread

    Let's do some clarity BAFANG BESST 3.0 programming interfaces are all the same. BESST is a product for bike dealers/assemblers. The account is issued by Bafang to the assembler/builder/reseller buyer. When connecting with the controller/HMI/battery/sensor, the program verifies that the serial...
  8. C

    Programming the Bafang Middrive BBS01+BBS02

    Hi, do you think it is possible to decompile the firmware for the M600 controller? I am attaching the file.
  9. C

    Bafang M500/M600 thread

    The firmware for the 48V, in levels 1 and 2 has a discontinuous operation that is not very pleasant to use and the battery consumption suffers. The latest firmware for the 43V is smoother and consumes less battery. I asked bafang if it was possible to have an updated firmware like the 43V...
  10. C

    Bafang M500/M600 thread

    Update: They gave me a new BESST account and with this I was able to increase the speed up to a maximum of 60km / h. So the accounts don't all have the same privileges. I read on another thread that they managed to access BESST without credentials, for the moment only with version v.1.2.17...
  11. C

    Bafang M500/M600 thread

    It also rarely happens to me that error 21 appears during use on foot, with the accelerator at very low speed, just push the mtb until it reads the speed sensor and everything starts up again.
  12. C

    Bafang M500/M600 thread

    The only side effect is the indication of the battery level which is wrong, for the rest only advantages. This is mainly used at level 1 and 2, 3 for extreme climbs, 4 and 5 are not used.
  13. C

    Bafang M500/M600 thread

    This is the firmware with my motors arrived dated 2019-11-26. My current firmware is much better. It is dated 2020-08-06.
  14. C

    Bafang M500/M600 thread

    It would be useful to be able to adjust the level values. Unfortunately, the maximum speed can only be lowered, there is a block that does not allow to go beyond that decided by the manufacturer. Of course you can change the wheel diameter to bypass the problem.
  15. C

    Bafang M500/M600 thread

    This is the M600 controller configuration page of the Bafang BESST program. Unfortunately the parameters that can be set are few, speed limit, type and wheel circumference and sensors calibrations. Note: The speed limit can only be lowered, the maximum level is decided by the manufacturer and...
  16. C

    Bafang M500/M600 thread

    This is the connection diagram of the M600.
  17. C

    Dreambuild EMTB Dengfu M09/Luna X1 Bafang M600 with a slacker fork angle/Increased wheelbase

    Did you continue with this project?
  18. C

    Dreambuild EMTB Dengfu M09/Luna X1 Bafang M600 with a slacker fork angle/Increased wheelbase

    I burned all three Dengfu supplied chargers in the same way. I bought three 3A TANGSPOWER chargers, never had a problem. I assume the Dengfu chargers are faulty.
  19. C

    Dreambuild EMTB Dengfu M09/Luna X1 Bafang M600 with a slacker fork angle/Increased wheelbase

    Try contacting Dengfu via AliExpress.
  20. C

    Bafang M500/M600 thread

    The triangular yellow cable is used to connect the bms of the bafang batteries.
  21. C

    Bafang M500/M600 thread

    I meant that it can be used on all motor models, including BBS. For M600, when you need to update, the first thing required is to read the engine serial, otherwise it does not update. I imagine there is a block that allows you to modify the motors that have been purchased.
  22. C

    Bafang M500/M600 thread

    Only problem with this update, the preset battery voltage is 43V and if the battery is 48V, the indication on the display is wrong. I wrote to Bafang to find out how it is set up.
  23. C

    Bafang M500/M600 thread

    Hello, the BESST software can be downloaded from the Bafang website, the BESST interface I bought together with the M600 motors from CNE Bikes who provided me with a username and password to use it. The firmware I am attaching. Note: the BESST tool can be used on all Bafang motors.
  24. C

    Bafang M500/M600 thread

    Hello everyone. I have recently assembled three Dengfu E05 frames with Bafang M600 motors purchased from CNE Bikes. I confirm that the motors are not smooth and have excessive battery drain. After some complaints to the supplier, I was sent a firmware dated August 6 and surprise, with this the...
View older results
Back
Top