Search results

Date Relevance Most replies

  1. steveo

    Revive a dewalt cell.. Is it possible?

    I'm obtaining a free dewalt pack from a local service centre with probably a bad cell problem; is there any possibility of bringing the bad cell back to life? How would i go about doing so? thanks -Steve
  2. steveo

    Crystalyte Controllers ... Please recommend a controller

    Hi I 'm currently looking for a cheap setup for a friend of mine looking to change over an ebike 8). I'm going to hand him over my 26" 250w hub motor. I was able to do about 50-55km/h with that wheel on a 72v-40amp controller & 6 series 7.5ah sla batteries; Which controller can you recommend...
  3. steveo

    Crystalyte Controllers - Repair and Modification information

    Hey fechter I've wired up the potentiometer to the throttle to have better throttle response and its working like a charm :); Just wanted to ask you which potentiometer would you suggest to use to adjust the LVC? i was thinking if i could use the LCV to set a limit as to how much can be...
  4. steveo

    Crystalyte Controllers - Repair and Modification information

    Hey fechter I've wired up the potentiometer to the throttle to have better throttle response and its working like a charm :); Just wanted to ask you which potentiometer would you suggest to use to adjust the LVC? i was thinking if i could use the LCV to set a limit as to how much can be...
  5. steveo

    Crystalyte Controllers - Repair and Modification information

    Hey fechter I've wired up the potentiometer to the throttle to have better throttle response and its working like a charm :); Just wanted to ask you which potentiometer would you suggest to use to adjust the LVC? i was thinking if i could use the LCV to set a limit as to how much can be...
  6. steveo

    Crystalyte Controllers - Repair and Modification information

    thanks for clarifying.. i though it was used to restrict power to the hub motor .. hmm i wonder if there is such a mod without having to purchase the cycle analyst ..
  7. steveo

    Crystalyte Controllers - Repair and Modification information

    thanks for clarifying.. i though it was used to restrict power to the hub motor .. hmm i wonder if there is such a mod without having to purchase the cycle analyst ..
  8. steveo

    Crystalyte Controllers - Repair and Modification information

    thanks for clarifying.. i though it was used to restrict power to the hub motor .. hmm i wonder if there is such a mod without having to purchase the cycle analyst ..
  9. steveo

    Crystalyte Controllers - Repair and Modification information

    i may open up the controller on the weekend; i'll take a trip to the local electronics shop to check if they have the fets before i get started :P.. i think i should upgrade my motor before even considering this modification; i don't think my motor is very efficent; i'm running a 250watt motor...
  10. steveo

    Crystalyte Controllers - Repair and Modification information

    i may open up the controller on the weekend; i'll take a trip to the local electronics shop to check if they have the fets before i get started :P.. i think i should upgrade my motor before even considering this modification; i don't think my motor is very efficent; i'm running a 250watt motor...
  11. steveo

    Crystalyte Controllers - Repair and Modification information

    i may open up the controller on the weekend; i'll take a trip to the local electronics shop to check if they have the fets before i get started :P.. i think i should upgrade my motor before even considering this modification; i don't think my motor is very efficent; i'm running a 250watt motor...
  12. steveo

    Crystalyte Controllers - Repair and Modification information

    what is that potentiometer i believe its hooked up to the cycle analyst port if i'm correct; i'm taking a long shot but it that the restrict the power to the controller? what potentiometer are you using?
  13. steveo

    Crystalyte Controllers - Repair and Modification information

    what is that potentiometer i believe its hooked up to the cycle analyst port if i'm correct; i'm taking a long shot but it that the restrict the power to the controller? what potentiometer are you using?
  14. steveo

    Crystalyte Controllers - Repair and Modification information

    what is that potentiometer i believe its hooked up to the cycle analyst port if i'm correct; i'm taking a long shot but it that the restrict the power to the controller? what potentiometer are you using?
  15. steveo

    Crystalyte Controllers - Repair and Modification information

    I think i will end up staying on the safe side @ 100v using the 100v IRFB4110 fets; Will i have to change capacitors with those fets or can i use the originals? p.s. thanks for all the quick responses guys; this forum is awesome for diy info 8)
  16. steveo

    Crystalyte Controllers - Repair and Modification information

    I think i will end up staying on the safe side @ 100v using the 100v IRFB4110 fets; Will i have to change capacitors with those fets or can i use the originals? p.s. thanks for all the quick responses guys; this forum is awesome for diy info 8)
  17. steveo

    Crystalyte Controllers - Repair and Modification information

    I think i will end up staying on the safe side @ 100v using the 100v IRFB4110 fets; Will i have to change capacitors with those fets or can i use the originals? p.s. thanks for all the quick responses guys; this forum is awesome for diy info 8)
  18. steveo

    Crystalyte Controllers - Repair and Modification information

    which fets would be best? at 100v 4110's as per what your saying? i haven't opened my controller yet .. but how many would i be needing? if i wanted to lets say go all out and put 150v.. which fets would i be needing .. has there been may heat problem pushing the controller that far.... p.s...
  19. steveo

    Crystalyte Controllers - Repair and Modification information

    which fets would be best? at 100v 4110's as per what your saying? i haven't opened my controller yet .. but how many would i be needing? if i wanted to lets say go all out and put 150v.. which fets would i be needing .. has there been may heat problem pushing the controller that far.... p.s...
  20. steveo

    Crystalyte Controllers - Repair and Modification information

    which fets would be best? at 100v 4110's as per what your saying? i haven't opened my controller yet .. but how many would i be needing? if i wanted to lets say go all out and put 150v.. which fets would i be needing .. has there been may heat problem pushing the controller that far.... p.s...
  21. steveo

    Crystalyte Controllers - Repair and Modification information

    could i do this fet replacement mod to the 40 amp version of this controller? http://endless-sphere.com/forums/viewtopic.php?t=764 i'd like to be running 100v+ thanks Steve :lol:
  22. steveo

    Crystalyte Controllers - Repair and Modification information

    could i do this fet replacement mod to the 40 amp version of this controller? http://endless-sphere.com/forums/viewtopic.php?t=764 i'd like to be running 100v+ thanks Steve :lol:
  23. steveo

    Crystalyte Controllers - Repair and Modification information

    could i do this fet replacement mod to the 40 amp version of this controller? http://endless-sphere.com/forums/viewtopic.php?t=764 i'd like to be running 100v+ thanks Steve :lol:
View older results
Back
Top