Search results

Date Relevance Most replies

  1. E

    Raptor 140,MUX 3K ,Nucular Middi, Lipo Battery,16s 32Ah- $3500r

    MUX has larger Phase wires Heat sink and Ferro fluid Lipo Battery Eaton 1800w charger Fox Bomber front forks, Fox RC2 rear shock Shimano Zee Brakes front and rear Mavic Rims, Hook worm tires with a new spare Range 100k normal riding, 140k with peddling Lights Horn and rear Blinkers Cruise...
  2. E

    Kona Stinky build

    My original ebike frame was an ebay ‘Special’ I built up, so I thought before I kill myself I’d better upgrade to a decent bike. I wanted a strong frame, good suspension and large hydraulic disk brakes. I found a well used but mechanically good Kona Stinky for the right price...
  3. E

    Thread on GM hubs nonstandard?

    Hi, I got my GM hub with the freewheel attached. It was getting really noisy so I found an IRD 11 32 freewheel to replace it. I bought a Park freewheel tool and removed the old one but when I tried to thread the new one on it only went on about 2 to 3 turns!!!!! before it bound up. I have a...
  4. E

    Kona Stinky rear alloy swing arm to 150mm

    Hi, I have a Kona Stinky I am about to fit a GM 1000w hub motor to. I would love to keep the disk brake. I am a bit worried about damaging the swing arm while spreading it to 150mm from 135mm. Has anybody done this to this bike, and how did you do it?....with a jack?.... I guess I am after some...
  5. E

    Thinest Diskbrake Caliper -Hub motor clearance?

    Hi, Can't find any info on dimmensions of Diskbrake calipers other than mounting info. I want to know the distance from the rotor inwards for clearance to a hub motor. Does anyone have any info on this or suggestions on a good 'thin' caliper? Any brand, mechanical or hydraulic(prefered)...
  6. E

    Thread on 5 speed freewheel for GM, where?

    Hi, Looking to replace my 5 speed freewheel on my GM hub motor. Where can I buy, what is the thread sizes and is it common? ...and any other comments you can throw in... Thanks Eddie
  7. E

    CA connection to 206 board HE pin, no NPN

    Just getting all the new fets and wires sorted out on my new 206 6 fet board. My board dosn't have a transister at the hall connection area(HE) for the CA connection. WiIl a 2N2222A do the job? Also where does the throttle wire from the CA go? Thanks Eddie
  8. E

    4110 mosfets in AUS?

    Hi, Does anyone know where I can get genuine 4110 mosfets from in Australia. I only need 6, but will proberbly get 10. Eddie
  9. E

    Ping 48v 20a Dimensions?

    Looking at get a box together for a ping 48v 20a pack before it arrives. The size on ebay is 150x160x270..... is that Height Width Lenght or WHL or what? Are these accurate? Thanks Eddie
  10. E

    Number of pole pairs in GM hub?

    I'm setting up a CA and wondering what number of pole pairs a GM has. Thanks Eddie
  11. E

    Electraflyit's Red Devil

    Hi, Just got a GM 48v 1000w hub kit and installed it in a cheap DS ebay bike, works great. Saving for a ping pack but in the meantime 7 old 6 cell packs of GP3300's are just working. I looked at a seatpost rack but they are on the limit with the weight of a ping 48/20, so I built my own support...
  12. E

    Inside a GM 48v 1000w controller

    Hi, Just got a GM 48v 1000w hub kit and installed it in a cheap DS ebay bike, works great. I'm looking at adding a CA, can anybody help with the hook up points? Eddie
  13. E

    Disconnecting Pedelec?

    Hi, I have a GM pedelec controller( not what I ordered) Can I disconnect the pedelec sensor and use the controller without it? Or is their a wiring fix. Thanks Eddie
Back
Top