Search results

Date Relevance Most replies

  1. I

    Servo tester throttle issue

    Also to gain full use of the pot on the servo tester,I turned reverse off on the esc and lied to the esc when I programmed in the neutral position.I was testing this out on a car esc so it had reverse also.
  2. I

    Servo tester throttle issue

    Ok,thank you.I figured it out.I had to calibrate the esc to the servo tester.It is working now.Are you using the Mystery esc on a e-bike?How is it?
  3. I

    Servo tester throttle issue

    I just received a Turnigy servo tester I planned on using as a throttle for a E-Trike build.It does work but the motor does not start to spin until the knob is turned half way.Any idea's?Also,does that mean I am only getting 50% throttle or am I getting 0-100% throttle in half a turn of the...
  4. I

    New Rc motor,Tadpole trike build input needed

    Hi,the outer diameter is 3 1/2 inches on the adapter.I work in a machine shop and was just going to drill a mounting hole pattern on the pulley to bolt it on there.Would that work?I wanted to use belts because I just thought it would be quieter.
  5. I

    New Rc motor,Tadpole trike build input needed

    Hello to all and thanks for all your input on my trike build.I started to purchase items for my trike.I decided to go with the jackshaft reduction system as suggested.I purchased a motor (budget).It is a #SK-6374-170/7870 TGY AerodriveXp SK Series 63-74 170Kv / 3250W.I plan on running this on 36...
  6. I

    New Rc motor,Tadpole trike build input needed

    Some pics of my progress so far.
  7. I

    New Rc motor,Tadpole trike build input needed

    I wonder if I would be better off just using a 48v, 1000 watt brushless scooter motor?Would that eliminate my need for a two stage drive and still give me good acceleration and speed?
  8. I

    New Rc motor,Tadpole trike build input needed

    Hi,I didn't realize running a lower voltage would make the reduction easier.I'm new to all this e bike building.I was actually going to up the voltage to 48v.I was thinking that if I threw more power at it then I could use a smaller rear sprocket.I have been reading alot here at Endless Sphere...
  9. I

    New Rc motor,Tadpole trike build input needed

    Thanks alot for the fast responses.I am going to be using a 24" rear wheel and I did find 10 tooth bmx freewheel gears on ebay it that helps any.I was thinking on using the CC 160 hv.Think I could get away with a smaller esc like the CC120 HV?If I was going to use a 10 tooth front sprocket,what...
  10. I

    New Rc motor,Tadpole trike build input needed

    First off let me say I am new to the electric bike builds.I am currently building a tadpole trike that I plan on converting to electric.I work in a machine shop so I can make my own custom parts luckily.I planned on using a rc setup and just wanted to get some input on weather or not you more...
  11. I

    Disc brake to 130mm BCD adaptors are done

    Hi,I would be interested in purchasing one of these adapters.How could I get one?Is there a website I could order it from?Thanks
Back
Top