Search results

Date Relevance Most replies

  1. R

    Custom Bosch / Yamaha battery

    Hi! I try this circuit but don't work! can you tell me the exact components you used? Thanks
  2. R

    Greentime controllers

    Someone has managed to change LVC in 36FET controller? To enable the regen with 24s battery?
  3. R

    Greentime controllers

    Hello guys! I have 36 fet version! I need to active the high level brake,i try to short single yellow wire whit battery+ but don't work,try to short whit 12+ Light and another don't work.I'm very hungry! My bike is very heavy and i need ebrake! Please help.
  4. R

    Greetings from Italy!!

    Rome is wonderful!!! I have same motor in my bike but "only" 100v battery. With 115v i think your bike is very very powerful.
  5. R

    1 kWh LiPo club, who's in?

    24s3p 12pack zippy flightmax6s5000maH 30c 1332 for me.
  6. R

    24 fet 80a controller for $130

    I have the 36fet version (4410). The contrller run very good :lol: ,but i have the same problem with 3speed switch. I try to short the black wire whit the orange and see a little throttle delay,if short the black whit the blue wire i have not seen any difference. suggestions?
  7. R

    24 fet 80a controller for $130

    This controllers is really interesting. I wait for a deep test on road by the owners.
  8. R

    Re: 5KW 72V Controller 36 #4410 FET's, $108 #4110's $154

    Looks really good. What are the measures for the 24Fet? I wait for the first test!
  9. R

    Greyborg Hubmotor in action, 59mph

    Hi Zombiess, which is the maximum peak current that you recorded during the acceleration?
  10. R

    72v 1500W 40A Hua Tong CA08 XM06AD_P04.1 controller

    not the same manufacture: http://www.aliexpress.com/product-gs/499889288-72V1500W-55Amax-BLDC-motor-controller-18mosfets-wholesalers.html
  11. R

    72v 1500W 40A Hua Tong CA08 XM06AD_P04.1 controller

    Anyone try the 18 fet version? The manufacturer declare 55a continuos!!!
  12. R

    72v 1500W 40A Hua Tong CA08 XM06AD_P04.1 controller

    Second run with hill climbing! I go up amazing, but the controller is hot, too hot. The start is still fantastic with power whilie!!! :twisted: I thinking to reduce the shunt mod for reduce FET high temp. Tommorow another test run.
  13. R

    72v 1500W 40A Hua Tong CA08 XM06AD_P04.1 controller

    Today i opened my controller,it's the new board revision with the 4710 FET. New Board: The FET: My removable mod for shunt: I cut unnecessary wire: I tested the mod controller for 10 km with 100V10ah battery and CHM 48V1000W. Now accelleration is very impressive.CHM scream!!! :lol:
  14. R

    72v 1500W 40A Hua Tong CA08 XM06AD_P04.1 controller

    Someone can post some pics of the modded shunt. I have no idea how to mod it.
  15. R

    72v 1500W 40A Hua Tong CA08 XM06AD_P04.1 controller

    First test at 24s2p,8x5000 zippy 30C. I have tested this controller at 24s charged at 4,15v cell, total 99,6v. The performance are very strong, Chm motor and controller run cool. :D Max speed 77,2 Km/h in the flat,i climb hill very easy,good accelaration but no wheelie. :D I will test the...
  16. R

    72v 1500W 40A Hua Tong CA08 XM06AD_P04.1 controller

    I was wrong wires! the right combination was suggested me by Wesnewell in another topic! :) Tommorrow new test with 24s2p lipo (at 4,1V cell.). Now i Have to repair the dead zone of magura throttle. The magura throttle is very sensible but the dead zone cause minor resolution. Any suugestion to...
  17. R

    Running a CHM at 72v, are modifications needed?

    Thanks Wesnewell, Now run very fine! :D Tomorrow i try whit 24s. :)
  18. R

    Running a CHM at 72v, are modifications needed?

    I have the same motor and controller. what combination of colors you used for the wire? I have a problem of low torque and speed, I can't understand what it is.
  19. R

    72v 1500W 40A Hua Tong CA08 XM06AD_P04.1 controller

    Please help me! I have a trouble with this controller. I have a CHS 48v1000w motor with 18s lipo and magura throttle,but in my first run the motor is very noisy and very low speed(15 mph) and poor torque. :( I connect the motor phase and sensor wire with same color, other connector are...
  20. R

    72v 1500W 40A Hua Tong CA08 XM06AD_P04.1 controller

    Fine!!!
  21. R

    72v 1500W 40A Hua Tong CA08 XM06AD_P04.1 controller

    Hi, This controller work with magura throttle?
  22. R

    72v 1500W 40A Hua Tong CA08 XM06AD_P04.1 controller

    Hi guys, After your test, what are the maximum specifications of this controller? I can go at 24s lipo (max 100,8v) 40a with this controller. I would like to use it with my 48v1000w conhismotor. You think its ok? Sorry for my terrible english.
Back
Top