Search results

Date Relevance Most replies

  1. F

    do you need sensored setup for drifting/doughnuts?

    watch out for nowind he drives mostly with sensoreless boards https://www.youtube.com/channel/UCTiFtpdd0nVU915rn5Klpow
  2. F

    ALIEN DRIVE -STL uploads -various

    nice! thanks a lot
  3. F

    FAULTY ITEMS AND BAD SERVICE FROM DIYELECTRICSKATEBOARDS

    give him some time, he is realy busy. But he tries always to make the customer happy, if you give him the chance. I broke a part from my BoltOn Mount. I wrote him a simple email with 2 pictures. He answered me around 2 Weeks later with the question, if we could share the shipping costs...
  4. F

    2nd E-Toxx build

    if I remember it correct nowind got from 1Ah 1km of ride with his board, but i am not sure if that was on 8s or 12s
  5. F

    OpenSource Remote for VESC ArduBoardControl

    I know its a huge step - but change the Arduino libs to native C Code for UART/Display/Serialcommands and you should get tons of free memory
  6. F

    Battery packs and cell choices

    Hey I have 38120 10Ah Headways on one Longboard. The only disadvantage on these cell is the size - 4cm in depth is to much - i change this Setup to 18650 LiIon at the moment. And they have less power per volume than LiIon Cells.
  7. F

    Quad Drive Longboard

    Why are they not rocket ship? They are rated for 70Amps each - thats at 12s 50A per Motor (210A overall) and there is a guy in germany who made a Offroad setup with 4 motors/VESCs http://www.elektro-skateboard.de/forum/eigenbauten-95/mbs-pro-90-4x-vesc-ntm5060-12s-4349.php
  8. F

    OpenSource Remote for VESC ArduBoardControl

    wow, 14mm depth is nearly nothing! I cant believe that. the biggest problem is the joystick which pushes the depth up to 23mm - it would be realy nice to see your trigger mechanism. If this is done its realy easy to reshape my case (turn my PCB by 90° and use a slim battery) and the display is...
  9. F

    OpenSource Remote for VESC ArduBoardControl

    hey s28400 thats a nice case, what are the dimensions (metric plesae)? I can't explain it as I wan't with my english knowlage, they should be some positiv impulses to improve your case! There are some points to consider: don't forget the wiring, the screw holes requires a lot of space and the...
  10. F

    Opensource Remote / BMS / BEC

    ok sorry - i cant explain it perfektly in english i am looking for a smaller way to implement the trigger for speed up/break. the only thing that is small enough is the joystick, i have not found a potentiometer (linear or thumb) that fits into a remote and comes automaticaly back to zero (as...
  11. F

    Opensource Remote / BMS / BEC

    the first step is always a dump controller - it works already with my proof of concept build: i have one unit, exklusiv joystick, left at the moment, if it works save I can send it to you (hopefully 2 or 3 weeks) it would be nice if you share your housing concept (pm is ok) and your design for...
  12. F

    Opensource Remote / BMS / BEC

    thats a difficult question - I had the most parts already in stock a quick out of mind answer for one unit: 2€ Controller 2€ FTDI UART-USB 2€ NRF from china 1€ Joystick 2€ Bat (standart 18650 cell) 8€ PCB 5€ other peaces ~25€ plus 15€ for a 3d printed Case (13€ extra for the Display) But these...
  13. F

    Opensource Remote / BMS / BEC

    it took some time but here are some news: The new V3 PCB is assambled, but its not nice to programme/develope it only with a programmer - i ordered a debugger that arrives hopefully next week. slow german shippig -.- You can break down the trigger PCB for another placement in a Case. The...
  14. F

    E-GO by Yuneec Internationl

    Hey please take some photos of the electronics, because I think that the Controller dies slowly with the higher voltage. I hope for you it is ready for 10s but just to be sure take the time and shoot some fotos.
  15. F

    E-GO by Yuneec Internationl

    if you are take some photos of the pcbs i can check the components for which voltage they are rated.
  16. F

    Marbel Board! (FINALLY!)

    TX is an RN4020 from Microchip http://www.microchip.com/wwwproducts/Devices.aspx?product=RN4020 Bluetooth 4.1 comunicaton over UART 7dBm transmit power The controller is also from Microchip but I cant read which one
  17. F

    Loaded Vanguard 2015 Dual VESC / Rear 12S

    that looks awesome! I need more time to finish my own build! Do you have a foto with mounted motors and cases?
  18. F

    Loaded Vanguard 2015 Dual VESC / Rear 12S

    @ onloop: A123 Cells are LiFePo4 Cells, they manage a lot more cycles than other chemistrys : more than 1000 cycles at 10C/25A and 100% DOD a LG ICR18650HE2 hits at 20A only 200 cycles (or is there another Cell in the SPACE CELL battery? ) Thats the biggest advantage, but they are expensive...
  19. F

    New Carbon Fiber Electric Skateboard Deck Style??

    Hey Tourqueboard - I think the boardlength isnt that important - the wheelbase is definitly more interesting: The Wheelbase defines the room for our electric components and also the agility A board without kickers is shorter but the wheelbase is the same because the wheels are at the same spot...
  20. F

    JP spot welder

    Hey riba - are this pic's from a testrun? Because 14ms is a long time for a spotweld?
  21. F

    Loaded Vanguard 2015 Dual VESC / Rear 12S

    okp thats awesome!! i have to reconsider my own enclosure! I think a carbon fibre case makes no problems if nothing touch it
  22. F

    Opensource Remote / BMS / BEC

    Just a short information: I made a fast sketch for a evolve similar remote after some talking to whitepony: It uses the same components as my V3 Design. I know that the Battery is to big, but I can´t find a good, small and cheap replacment for it - is there somebody who knows one? (a 18650...
  23. F

    Opensource Remote / BMS / BEC

    why isnt the picture visible? I got my 3D printed parts: The parts are not perfekt printed, so i had to do some extra work with a scalpel. But after that it fits perfektly together. The location of the Cruisebutton and Trigger is perfekt. And the other componentes are fits also well. But the...
  24. F

    10S custom skate ESC: testers wanted!

    measure the resistance of the capacitor (from positiv pin to neg. pin) - is it a shortcut?
  25. F

    Opensource Remote / BMS / BEC

    I made some progress. The encloser für the remote is in order and my first "prototype" is ready to hit the road. unfortunately my motor is broken and i cant test my remote now outdoor, but it works great on my bench- the remote works through 2 concrete walls At the moment there are the...
Back
Top