Search results

Date Relevance Most replies

  1. C

    New "TSDZ2 Torque Sensor Central Motor"

    Hi all. What is the current best, safest .hex file to flash to my 2019 36v 350w motor? Thanks
  2. C

    New "TSDZ2 Torque Sensor Central Motor"

    One more pic. The biggest problem is the circlip groove. It is a massive stress riser and is where the crack starts to form. I can't imagine shot preening working here. One thought I have had is to tig weld up the circlip groove and to find another way of locating the axle. Or at least tig the...
  3. C

    New "TSDZ2 Torque Sensor Central Motor"

    It snapped on the drive side at the circlip groove. The crack appears to have been propagating for a while looking at the fracture surface. The axle snapped landing a decent sized drop on a downhill track. I have not fitted the extra bearing and do not believe it would have any effect on this...
  4. C

    New "TSDZ2 Torque Sensor Central Motor"

    Its an old Roox chain dog lower roller. I've just cut down the mount and bolted it on to the lower shock mount. It keeps the chain on most of the time, but ive ordered a 104bcd adapter and am going to run a narrow wide ring and hopefully that stops all dropped chains. Dug a little deeper...
  5. C

    New "TSDZ2 Torque Sensor Central Motor"

    Just snapped an axle at 540kms. Anyone know where to buy just an axle by itself or the cheapest place to get a torque sensor unit?
  6. C

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    Yes my issue is a bad cell in the battery. It hits 3.0v while all other cells are still at 3.6v. When it hits 3.0v it triggers the BMS and shuts off the battery while the the battery voltage is still 35.5v.
  7. C

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    Thanks everyone, looks like I probably have a bad cell. I have cut into the battery and am charging each group of cells individually with an RC charger as suggested. These are the voltages I measured when fully charged 1. 3.97 2. 4.08 3. 4.08 4. 3.97 5. 3.97 6. 4.19 7. 3.97 8. 3.97 9...
  8. C

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    You were correct, I ran the battery on a light globe until the bms shut it off at 35v. Do you know if it is possible to change the LVC on a battery bms?
  9. C

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    Sorry, I am very new to programming. What personal setting would I be inserting in the config.h file? Why cant I just use the settings in TDSZ2_Controller_vM0.19.C.hex?
  10. C

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    I have the VLCD6 display. I was under the impression that Marqoc settings suited the 36v motor? All I really need is the original .hex file with the LVC changed to 29v (battery BMS 30v.) The problem is I only get half range out of my battery as the motor turns off at 35.5v. Thanks
  11. C

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    Is it not possible to flash TDSZ2_Controller_vM0.19.C.hex file using STVP?
  12. C

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    Thanks, I need to flash using the STVP as the .Jar compiler does not work on my PC, which is why I need the latest .hex file for a stable version. Can I just flash TDSZ2_Controller_vM0.19.C.hex file using STVP? Thanks
  13. C

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    What is the latest most stable .hex file to suit 36v 350w motor? And where can I get it from? What is the most simple way to change my low voltage cut off? I have 36v 350w tsdz2 Motor cuts off at 35.5v battery voltage now I want to cut off at 29v. How do I change this simply? Thanks
  14. C

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Do you have a link?
  15. C

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    What is the simple way to change my low voltage cut off? I have 36v 350w tsdz2 Motor cuts off at 35.5v now I want to cut off at 28v. How do I change this simply? Thanks
  16. C

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    Does anyone know the stock low voltage cut off is set at?
  17. C

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    I cant get the java configurator to work. How do I directly flash using the STVP programmer? I have tried loading one of the .hex files from the 'release' folder and flashing it to 'program memory' tab, however the motor lost all power. How do I flash Marqocs firmware to the motor using STVP?
  18. C

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    Thank you Zappan :thumb:
  19. C

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    Can someone please provide a basic step by step guide of how to flash the motor with Marcoq's firmware?
  20. C

    New "TSDZ2 Torque Sensor Central Motor"

    Sorry for the dumb questions. Can I just flash the motor controller to change the low voltage cut off and not flash the LCD display at all? All I want to do is change the low voltage setting in the motor, can I just do that alone changing a line of code ?
  21. C

    New "TSDZ2 Torque Sensor Central Motor"

    I'm having trouble figuring this firmware thing. Can I flash firmware if I have the VLCD6 display?
  22. C

    New "TSDZ2 Torque Sensor Central Motor"

    Stock firmware
  23. C

    New "TSDZ2 Torque Sensor Central Motor"

    I'm not interested in flashing any firmware, is there a way to set the low voltage on the VLCD6? I'm pretty surprised and disappointed that it only uses half the battery ? And after reading most or this thread before purchasing no one has made mention of this?
  24. C

    New "TSDZ2 Torque Sensor Central Motor"

    Thanks So I need to re flash firmware ? Do you know what it is set at standard ?
  25. C

    New "TSDZ2 Torque Sensor Central Motor"

    Does anyone know what the minimum voltage my 36v tsdz2 will cut out at ? Seems to have shut off at 35v today leaving half battery capacity.
Back
Top