Search results

Date Relevance Most replies

  1. plasmdude

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    My bike was down for the last month after I blew the motor/controller. In the meantime I was riding my beast of a Cyclone 3000w. While that rig is fun, its not exactly reliable and likes to eat chainrings/chains for breakfast. I rebuilt my bike with new controller/motor/blue cog/860c/hydraulic...
  2. plasmdude

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    It would seem to be an IO Error, idiot operator. Adjusting both sensor and wheel size solved the issue. The speed sensor is almost touching the magnet, rotating the sensor off axis helped a lot. When rebuilding my bike I stripped everything off including the speed sensor. When I put it back on...
  3. plasmdude

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Here is a clip of the issue. Can reproduce with just a kick or two on the petals and lifting the back. On the road when this happens the power drops to almost zero and kicks in for slight bursts. https://youtu.be/p7hAIck0ElA Also noticed an issue with the startup boost. At start up I would get...
  4. plasmdude

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Long time user of the tsdz but first time posting. I have put about 1500 miles / 2400 km on my first unit. With the last 1000 miles on the open source 0.2 with the lds3. I recently learned that this unit does indeed have limits and should use the temp sensor mod. I had the parts but kept...
  5. plasmdude

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Shameless thank you plug! I have been following this TSDZ2 thread since February slowing gathering supplies and finding time to install. I have now put 1.4k miles on my build and its a joy. I use for my commute into work 20 mile round trip. I installed the v0.20-beta.1 last night and am loving...
  6. plasmdude

    Remove Stock Display for Cycle Analyst

    Thanks! Will read up.
  7. plasmdude

    Remove Stock Display for Cycle Analyst

    Broke open the display to see the pinout and how it communicates with the controller. https://goo.gl/photos/6TcArB7tu1HAvTou8 This is what I found: TC244334 - Model number of Display Pinouts: HRSD - Not Connected PWM - Not Connected VCC - Red +48v Ignition Supply Wire DMS - Yellow +48v...
  8. plasmdude

    Remove Stock Display for Cycle Analyst

    I have just completed by build of 1500w eBike with a custom built battery 48v 21a 13S10P from salvaged 18650 cells. Pictures of the build: https://goo.gl/photos/UQqAHeCk3gohuHJN6 I used the following to add a CA Plug to my generic controller...
Back
Top