Search results

Date Relevance Most replies

  1. B

    KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)

    nothing has changed, after one minute the wheel starts to twitch. short pulses are applied to the wheel. I do not understand anything ((( ipzApnPyH0I
  2. B

    KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)

    Thanks for the help! Sometimes the wheel starts to rotate itself without pressing the throttle. what to choose? pwm directly or current / speed?
  3. B

    KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)

    installed the firmware on the new controller. without load - speed 47km/h with a load of 5km/h. the wheel continues to spin after releasing the throttle. Is it possible to adjust the lower value of throttle?
  4. B

    KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)

    Please see my config.
  5. B

    KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)

    I do not understand how this works. Is it possible to disable PWM? Is it possible to disconnect all PAS sensors from the settings? I have only a throttle.
  6. B

    KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)

    Sorry ) config.h #define PWM_DUTY_CYCLE_RAMP_UP_INVERSE_STEP 35 #define PWM_DUTY_CYCLE_RAMP_DOWN_INVERSE_STEP 35
  7. B

    KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)

    I ordered a new controller ;). How to set up PWM_DUTY_CYCLE_AMP correctly? My battery is 48V.
  8. B

    KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)

    After attempts to configure PWM_DUTY_CYCLE_AMP the controller burned out. The wheel began to spin and stop very choppy. I did not press Throttle!
  9. B

    KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)

    now checked in the apartment. very slow acceleration ( Oh... ADC battery current max 15 :oops:
  10. B

    KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)

    ypW0wgL6zVM
  11. B

    KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)

    it seems that everything is fine! tomorrow I will check on the street. now record a video! Thank you so much! can i connect lcd5?
  12. B

    KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)

    with this code, the wheel stops as needed only very quickly)
  13. B

    KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)

    20mA battery current at maximum speed (50km/h)? The throttle reacts very strongly. possible to make less sensitive?
  14. B

    KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)

    1.5 A normal current for idling?
  15. B

    KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)

    I stop it with my hand when I release it again it rotates XQ3-fZRpsYc
  16. B

    KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)

    change code in breake.c ? Nothing has changed
  17. B

    KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)

    does not depend on regen. now picked up the configuration. 131 degrees motor offset and interpolation 0. The wheel rotates well but does not stop until the end. slowly rotates after releasing throttle
  18. B

    KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)

    Yes, I wrote that it was solved. the motor does not stop
  19. B

    KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)

    perhaps I need to remove the extra settings from config.h. pas, etc. ? I have only a brake and thtottle. what else can you think of to simplify the settings?
  20. B

    KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)

    Regen disable JkIL-AzRZys Regen enable FdvNRbqbD6E motor does not start with regen enabled you do not know what phase settings are in the standard firmware setting C2? I worked well with the C2-2 setup
  21. B

    KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)

    what is your offset angle?
  22. B

    KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)

    1 - yes 2 - no offset angle and interpolation 60 - 0 degrees. but this is not a sine wave ( maximum speed not constant. the current varies from 1.3A to 2A
  23. B

    KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)

    no one will answer my question?
  24. B

    KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)

    Yellow. Green. Blue. ? Or Blue. Green. Yellow? 1 | 0 volts | 5 volts | 0 volts 2 | 5 volts | 5 volts | 0 volts 3 | 5 volts | 0 volts | 0 volts 4 | 5 volts | 0 volts | 5 volts 5 | 0 volts | 0 volts | 5 volts 6 | 0 volts | 5 volts | 5 volts I chose the right combination! I changed...
  25. B

    KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)

    ABC or CBA ? My configuration Blue. Green. Yellow 0 5 0 - 1 5 5 0 - 2 5 0 0 - 3 5 0 5 - 4 0 0 5 - 5 0 5 5 - 6 does the wheel need to rotate in the backward...
Back
Top