• Howdy! we're looking for donations to finish custom knowledgebase software for this forum. Please see our Funding drive thread

Search results

Date Relevance Most replies

  1. A

    24kW stand-up scooter with air suspension

    Made a new engine. For the first time, an error was made in the air gap between the stator and the magnets. He was too big. Now the air gap is 0.5 mm. I drove the first 200km with a new engine. What can I say... before that, the scooter did not go :-D 100 km/h is gaining imperceptibly, even on...
  2. A

    24kW stand-up scooter with air suspension

    There is not much time to ride a scooter. Since the last report, I have driven only 600 km.(Total mileage 1700 km) Of the visible changes, only the wear of tires and pads. Finished the headlights. I took the model from the East-1 as a basis. One headlight with a blind is a low beam. The second...
  3. A

    24kW stand-up scooter with air suspension

    Thank you very much! _2YEkPq43Os
  4. A

    24kW stand-up scooter with air suspension

    Well, the first 1100km has been passed. We can say that the run-in is completed) Over the past time, it turned out to optimally adjust the suspension and the steering position, and generally get used to the scooter. Very confidently holds the road, without a hint of wobbling, up to 100 km / h. I...
  5. A

    24kW stand-up scooter with air suspension

    A few videos about the production 8Ogi8m7e5Ak lLcDnj2W-xM AtFM2R44IfM QAF64PDOzks
  6. A

    24kW stand-up scooter with air suspension

    The brake and gas trigger are manufactured using high-quality bearings to ensure maximum smoothness of pressing. Each trigger is equipped with four programmable buttons Handlebar assembly
  7. A

    24kW stand-up scooter with air suspension

    The brake calipers in front and rear are the same. Movable with one piston. Front Rear Brake pads from a 50cc scooter The brake caliper mounts are made of steel
  8. A

    24kW stand-up scooter with air suspension

    The front wheel does not differ much from what was on Vostok1, although in this version the tire is tubeless and there are 4 bearings. Brake disc made of saw blade made in the USSR.
  9. A

    24kW stand-up scooter with air suspension

    On-board computer display case with mechanical buttons and full waterproofing Handlebar folding system
  10. A

    24kW stand-up scooter with air suspension

    The front suspension also has a working stroke of 160 mm. Unlike the first version of the scooter, the rake and trail have been changed Reinforced steering cup I also significantly strengthened the attachment point to the deck Steel steering axle with hole for wiring and hydraulic line The...
  11. A

    24kW stand-up scooter with air suspension

    Now a little bit about the rear suspension. In this version, the rear suspension is multi-link. So, I haven't come up with another way to position the shock absorbers horizontally and get a positive progression. Also in this version of the scooter, I changed the way the titanium axes are fixed...
  12. A

    24kW stand-up scooter with air suspension

    Hi! Please forgive me, but I would not like to make public all the nuances of production. I'm also wondering why? In the new version of the scooter , the power is 25 kW in one rear wheel ) Everything depends very much on the design of the vehicle. On this scooter, the speed of 50 Mph feels...
  13. A

    24kW stand-up scooter with air suspension

    The deck is also made of aluminum Front and rear deck Side parts Viewing window for coolant in the side of the deck Compartment for the cooling system pump Kit for initial assembly Coolant channels inside the deck walls Fitting Additional processing for the fit of the upper and lower...
  14. A

    24kW stand-up scooter with air suspension

    It all started with the engine. Based on the experience gained in the East 1, I have developed my engine, which is ideal for a go-kart tire. The challenge was to squeeze as much energy into this size as possible. To achieve this goal, I used the highest quality components. I ordered magnets and...
  15. A

    24kW stand-up scooter with air suspension

    Well, let's continue the topic) Many thanks to all readers of this topic, your attention and such high marks of my work! The project to create a scooter "Vostok 1 ver.2.0" turned out to be much more difficult to implement than I expected at the beginning... Therefore, everything dragged on...
  16. A

    24kW stand-up scooter with air suspension

    I do really appreciate all the feedback, concerning the expected V2 price. However there are several aspects, that I want you to know about that: 1. Yes, I do understand, that $18900 is a sufficient number. 2. First prototypes were sold for $25K. So there is no need to say that no one will...
  17. A

    24kW stand-up scooter with air suspension

    V 2.0 will cost $18 900
  18. A

    24kW stand-up scooter with air suspension

    Hello to everyone who has followed my story of creating WTF E-scooter! I want to share some good news with you. My workshop is about to be finished. It means that I am almost ready to produce first V2.0 of my scooter. Therefore I am considering pre-orders. Due to the fact that I am facing a lack...
  19. A

    24kW stand-up scooter with air suspension

    Also, they sent me a Vostok-1 for maintenance In the near future I will make a detailed review of the faults. Basically, before the first ride, I just pumped up the shock absorbers. Otherwise, there were no backlashes, creaks and other things. The last 2 months I just rode it and enjoyed it))
  20. A

    24kW stand-up scooter with air suspension

    In general, I just wanted a good scooter for myself, but could not find a ready-made one on the market. I started doing it myself and ... got carried away=))) The rest is described in this thread. Sorry, but I didn't understand the question. Why put the engine more, if rion and weeped lose...
  21. A

    24kW stand-up scooter with air suspension

    Greetings to everyone who is still waiting for the continuation, as well as those who have just joined this thread! The past year, frankly, was a difficult one for my project. Since March, everything did not go according to plan, my income plummeted and I had to be distracted to earn at least...
  22. A

    24kW stand-up scooter with air suspension

    Hello, my dear friends! I've got some good news for you! I am moving forward to mass production of my scooters! I've decided to create a project team. We are planning some fundraising in the nearest future/ And at the moment we are setting up the company and registrating a trademark. The most...
  23. A

    24kW stand-up scooter with air suspension

    Dear comrades, I am immensely grateful for your comments! It is only thanks to your support that I have the strength to move this incredibly complex project forward ))
  24. A

    24kW stand-up scooter with air suspension

    Davideus Not everything is as simple as it seems=) I started experimenting with a cooling system, just with passive, air cooling. I installed the impeller, air intakes, filled the oil inside the engine (without circulation), But these methods managed to raise the long-term engine power by...
  25. A

    24kW stand-up scooter with air suspension

    News from the front =) It was much more complicated than I thought.... In the beginning, I just wanted to buy CNC-machines and start producing "Version 2.0" scooters. I had a budget of $ 100,000. For a long time I tried to find suitable CNC-machines, but I didn't find anything worthwhile...
Back
Top