Search results

Date Relevance Most replies

  1. B

    TSDZ8 OSF (open source firmware)

    Yes, I'm familiar with this great test, which is why I'm less worried about the TSDZ8. But I think ebikestuff only tested the outside temperature; the inside temperature could be a bit higher. At best, it would just be a safety feature that you never need. But if it doesn't work with the TSDZ8...
  2. B

    TSDZ8 OSF (open source firmware)

    Can I also install a temperature sensor on the TSDZ8? I'm currently still using my TSDZ2, but I already have the TSDZ8 here and wanted to install it soon. I think the TSDZ8 shouldn't overheat under full load anymore, but if possible, I might play it safe and install a sensor there as well.
  3. B

    New TSDZ2 Open Source firmware with Bluetooth interface

    Yes, of course it's probably not the Street Mode itself, but the limitation to 250W. When limited to 750W and 15A max current (48V battery), the motor is much quieter. Your opinion with the 250W at wheels sounds interesting. I honestly haven't looked into the law in more detail. And yes, legal...
  4. B

    New TSDZ2 Open Source firmware with Bluetooth interface

    Hi mspider65, sorry for the late feedback. I had only this week again time to take care of my bike. I found the problem - fortunately nothing is broken by the wrong wiring. Instead, something must have gone wrong when flashing the motor firmware via STLink. After flashing again everything...
  5. B

    New TSDZ2 Open Source firmware with Bluetooth interface

    The wiring between controller and ESP32 is fine. There is no short circuit and I also checked the connection with a multimeter. I've attached a photo of the connector that I soldered RXC (yellow) and TXC (brown) to. Is that the right plug?
  6. B

    New TSDZ2 Open Source firmware with Bluetooth interface

    I think I may have made a big mess.... :oops: My ESP32 (thanks AZUR!) has been lying around for a few months now, eagerly waiting to be installed. Finally the weather is getting better and I have enough free time. So let's get to it... Read the Wiki... Read the Wiki... Read the wiki...
  7. B

    New TSDZ2 Open Source firmware with Bluetooth interface

    Thank you Azur, I have been following mspider65's project for a long time, but have been reluctant to order. Since now also in Germany very slowly the bike session begins again (it's snowing currently ...), your help comes as called :D Currently, Azur can still order for more people, probably...
  8. B

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    i follow the thread from time to time and if i understand and remember it correctly, geeksville was working on it in the past. A first test version didn't work though and after that geeksville was privately busy for some time and then apparently lost interest in the project and hasn't been...
  9. B

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    Apparently my PN hasn't been sent, so here's my answer again. What do you mean? What kind of type? I mean this gear: https://de.aliexpress.com/item/32827565766.html And yes, I come from the EU, from Germany to be precise.
  10. B

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    Just like john61ct writes, due to the better heat conduction to the case surface, the heat is also better conducted to the gear space. My question is if this is the main reason or the increased parameter. Since I don't understand the background of the parameter either - 35% of what? What does...
  11. B

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    Does the parameter MOTOR_ACCELERATION perhaps have an big effect on the maximum power transmission to the blue gear? Before I went on tour yesterday, I improved the heat conduction of my engine and also looked at the blue gear. It looked almost like new, absolutely intact (after ~500km). But on...
  12. B

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    In Germany we say "Jaein", which means yes and no. I don't know if there is anything comparable in English :) With Casainho's firmware you flash both the engine and the display. The VLCD5 display on the other hand cannot be flashed. That's why the functions are more basic and there are many...
  13. B

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    Here is an instruction how to connect the necessary flasher: https://github.com/OpenSource-EBike-firmware/TSDZ2_wiki/wiki/Flash-the-firmware-on-TSDZ2 The flashing is explained by the configuration program itself (just press the button after configuration).
  14. B

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    I don't know if I got you wrong or you got me wrong. I didn't and don't want to install a gear sensor, I just want two brake sensors. I don't see any sense in gear sensors, respectively I personally have no problem with the overrun fix. Anyway, I understood the manual of casainho (...
  15. B

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    I have now purchased 2 "BAFANG Hydraulic Brake Sensor" as recommended by casinho. On his wiki page he shows how to solder/connect the 2 contacts of the sensor to the 6pin LCD cable. Now I'm thinking about how to do this analog on the VLCD5. There are already 2 ports on the display for the...
  16. B

    TSDZ2 no longer works after disassembly [UPDATE: Works again]

    Thanks again, maximusdm. Due to your hint with the power cable, I thought again whether I might have broken something near the controller when opening the case. So I checked all cables again. I couldn't find any fault, but suddenly the motor is working normally again. When I wanted to reassemble...
  17. B

    TSDZ2 no longer works after disassembly [UPDATE: Works again]

    Thank you very much for your reply. I think the custom firmware has overwritten the error message. I will flash the original firmware tomorrow and see if it shows me anything. But I think more than "problem with motor" will not appear. My hope was that somebody might have experience with...
  18. B

    TSDZ2 no longer works after disassembly [UPDATE: Works again]

    Hi guys, I have a problem and maybe you can help me. Since I live in a mountainous region, my engine overheats quickly. Therefore I wanted to follow these instructions: https://github.com/OpenSource-EBike-firmware/TSDZ2_wiki/wiki/How-to-improve-motor-heat-dissipation. Unfortunately my engine...
  19. B

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    That makes sense. Thanks, then I'll turn off the compensation.
  20. B

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    Unfortunately I did not manage to modify the cooling system. But I could test the new Github version. Now the display and limit function works as intended :D Thanks a lot! Also the overrun fix works great. But... I think your E06 fix is not that good, because the error code (when reaching the...
  21. B

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    Thanks a lot mbrusa and stancecoke. I will test the new github version in a few hours. At the moment I am still at work and afterwards I first want to modify my engine for better heat dissipation. If the problem still exists I will upload my config.
  22. B

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    Hi, is it possible that the temperature sensor does not work in the current release? I have tested different settings yesterday and today and reflashed x times, but it does not work for me. With the last marcoq firmware and 20 °C temperature limit set, the motor stops (error code E06) as soon...
  23. B

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    okay, I can understand that. Thank you for the response. I hope that geeksville, buba or somebody else can help develop soon. Unfortunately, I can't program. The only thing I can do in the future (as soon as I use SW102) is to translate the wiki to german.
  24. B

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Hi Casainho, have the street mode any priority for you? I am waiting version for version but unfortunately no street mode yet. Maybe you don't need street mode and therefore you don't implement it?
  25. B

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    This is the last post from you, buba. Its all okay with you? :O
Back
Top