• Howdy! we're looking for donations to finish custom knowledgebase software for this forum. Please see our Funding drive thread

Search results

Date Relevance Most replies

  1. E

    Raptor 140,MUX 3K ,Nucular Middi, Lipo Battery,16s 32Ah- $3500r

    Oppps..... could the Mods please move this to Used
  2. E

    Raptor 140,MUX 3K ,Nucular Middi, Lipo Battery,16s 32Ah- $3500r

    MUX has larger Phase wires Heat sink and Ferro fluid Lipo Battery Eaton 1800w charger Fox Bomber front forks, Fox RC2 rear shock Shimano Zee Brakes front and rear Mavic Rims, Hook worm tires with a new spare Range 100k normal riding, 140k with peddling Lights Horn and rear Blinkers Cruise...
  3. E

    Nucular Electronics owner's thread (setup infos, FW updates, links etc.)

    I asked this in the Main controller thread as well, so sorry for the double post Just have a couple of questions on hooking up a Bake Light through port P1. I have the brake switch connected to IO8 on the display and I set port P1 to Spec. and PWM to Stop-Light. Should I be able to see, using...
  4. E

    Nucular electronics - complete kit for ev!

    Just have a couple of questions on hooking up a Bake Light through port P1. I have the brake switch connected to IO8 on the display and I set port P1 to Spec. and PWM to Stop-Light. Should I be able to see, using port state, that I have a output signal on P1 when I use the brakes? Also do I have...
  5. E

    Nucular Electronics owner's thread (setup infos, FW updates, links etc.)

    Vasily in the telegram forum advised on a PID value change that fixed my stuttering problem.
  6. E

    Nucular Electronics owner's thread (setup infos, FW updates, links etc.)

    Hi, Did you find what the problem was when the motor stutters. I have the same problem. Motor starts smoothly then stutters at about half speed. MXUS 3k Eddie
  7. E

    Yamaha PW-SE mid-drive motor tear down

    Hi, I have a PW-X2 and am building my own SpeedBox. Do you know if there is 5v to power a micro controller in the wiring harness and what wire? Not the light switch power as I want to use that to change modes. thanks Eddie
  8. E

    Qulbix Raptor 140

    I bought a Shimano 203 mm rear disc adapter and its too small. I think the helicoil is the way i'll have to go. thanks for the replies
  9. E

    Qulbix Raptor 140

    Hi, I know thread is a bit old but can anyone point me to where i might find the rear brake adaptor, one thread on mine is stripped. thanks Eddie
  10. E

    Nucular electronics - complete kit for ev!

    Hi, Is there a link to what order number you are currently up to. Gives us an idea of how far away our order is. Thanks for a great controller and your online support. Can't wait to get mine. Eddie
  11. E

    Bluetooth adapter for kelly controllers

    Did you have any success with the bluetooth pairing to the kelly app? Eddie
  12. E

    My battery building business...need your help

    Thanks for the reply Flippy. Yep, I'll do it the way you explained.
  13. E

    My battery building business...need your help

    Flippy What would you change on his battery Build? I'm about to do a EBIKE battery build and would like your input Just a medium power 16s 8p lion Thanks Eddie
  14. E

    The E-Gull

    Was that 400amps at about 100v? IF so 40kw max and about 10kw for cruise. So it looks like your 25min flight took about 5 to 6 kw. What battery capacity do you have.? Looks and sounds great. Eddie
  15. E

    ADAPTTO Controllers - new functions discussion

    All good ideas. But for me, External switches to change modes and to set cruise. Separate external (hidden) switch and mode for a low power police safe setting.(AUS) Bluetooth.
  16. E

    Kona Stinky hill climber build

    Get torque arms .... the dropouts WILL fail without them.
  17. E

    XPD: open-source keywin e-bike lab replacement

    Hi, I have EB2## and EB3## controllers. Does anyone know what 'speed 4' does in the EB3## software, or how it interacts with speed 1,2,3 & SL? I have all the speeds( 3 + SL)working in the EB2## software but am having problems working out the EB3## settings thanks Eddie
  18. E

    XPD: open-source keywin e-bike lab replacement

    What is the 'Speed 4' entry all about in XPD. I had the speed 1,2&3 on the 206 board sorted out, but now their is a speed 4 on the 306 board software?? What is it and how is it used? thanks in advance Eddie
  19. E

    foundingpower programmable bms

    Hi, Have you charged batterys though this yet to check the programable cutouts for HVC? Did it cutout at LVC to the set voltages? Sorry for all the questions, but this BMS seems like it would be perfect for a lot a situations if it works! No traffic on this thread makes me think there are...
  20. E

    Cheapest ebike charger

    Well said Motomech Eddie
  21. E

    XPD: open-source keywin e-bike lab replacement

    Those with a CA connected will know the shunt resistance of their controller, because it has to be set to get the correct amp reading. I should add 'only with unmodded shunts'. Eddie
  22. E

    My Tour of the North - Six days, 400 miles

    JennyB, Loved the journey..and the pics I will be over in your part of the world early September. We will spending a week B&Bing around N/Ireland. Love to be able to ebike it .mmmmmmmmmmm Eddie
  23. E

    XPD: open-source keywin e-bike lab replacement

    I tried it on a basic EB306 from Keywin and it came up with 'Programed successfull' or something like that. I can't try it on a bike yet until I upgrade it to 100v. thanks for all your work Eddie
  24. E

    Keywin E-bike Lab Parameter Designer Software Manual-ver 1.2

    Hi, Can you run different versions of XPD on the same computer? I have EB206 and EB306 controlers. Or is there a version that will program both? thanks Eddie
  25. E

    foundingpower programmable bms

    Hi, I looked into these a few weeks ago. Sent a few emails and got a response. I was just a liitle cautious and have done nothing yet. Really I was waiting for a some feedback from someone using one. Looks like you could be the man. Looking foward to hearing how they go. Eddie
Back
Top