Search results

Date Relevance Most replies

  1. W

    Sabvoton 72150 short?

    Will do best bet, as don't understand how it has so many saftey features from blowing it up, but seems that's only thing that has happened, will let you know what I find. Thanks What do you mean by potted inside?
  2. W

    Sabvoton 72150 short?

    I don't see what you mean by 1 of 60 thousand, if your being arrogant and smart, Then be smart to help me!! An the followers thing. Wtf is that supposed to mean?
  3. W

    Sabvoton 72150 short?

    The person above you seems to of understood everything, as assume he has been following my every post properly to understand!!!
  4. W

    Sabvoton 72150 short?

    Thats exactly what im thinking happened must of happened when trying to measure the voltage. But the amount protection cut off voltages etc for scenarios like this from reading the sabvoton 72150 specs sheet
  5. W

    Sabvoton 72150 short?

    The bike was bought already made the 12v are as thin as a hair and has been operational till I wanted too test the volts to splice into them for my gps, that was the whole plan
  6. W

    Sabvoton 72150 short?

    I have power from battery but no light even on controller now. The spark was to big for such little gauge wire for the 12v alarm power
  7. W

    Sabvoton 72150 short?

    I have disconnected, started from scratch, battery is reading voltage so power going into controller but nothing
  8. W

    Sabvoton 72150 short?

    That was my settings on multimeter
  9. W

    Sabvoton 72150 short?

  10. W

    Sabvoton 72150 short?

    Hi i hope someone can help, I was testing the 12v to alarm system via the connector an was going to spline into that for my GPS i just bought, as doing so i may shorted the alarm 12v, but for them low gauge wire, cant understand why the spark was way bigger than the current, Ive tried unwiring...
  11. W

    What Hall sensors to get?

    What power motors tho?
  12. W

    What Hall sensors to get?

    I'm in need of buying 3 hall sensors to replace in my hub. But don't understand the voltages etc.I know 5volts go into them but ones I'm looking up go in different voltages and. I have a 3000watt hub that can peak at 8000watts. Just would like to know wich powered ones I need? Its a Chinese...
  13. W

    Error 10, checked every connection, resistor black burnt smell

    I'm testing other resisters on another old bit of circuits I have and all giving me readings, but each setting reads different amount what ohm setting would I need to find the right 1 for it? Feels like I'm getting somewhere now. Thank you all
  14. W

    Error 10, checked every connection, resistor black burnt smell

    What I've replied first is what your saying then. Thank you for explaining it better to me. How do I know what voltage resister needed tho if your saying between them voltages?
  15. W

    Error 10, checked every connection, resistor black burnt smell

    The multimeter reads 1. Then touching the probes together goes to 0.00 untouch probes an goes back to 1. So I've unsoldered the resister from board and stays at 1. What ever setting I put it on?
  16. W

    Error 10, checked every connection, resistor black burnt smell

    I am trying to learn soz, I will desolder it off the board and check then, this is my hobby, I'm not a qualified electrician like you sound you are. Then I should know if there's a short on the board, and get a more accurately reading. Yes? The digital meter he has is same as mine, so will watch...
  17. W

    Error 10, checked every connection, resistor black burnt smell

    I tested It whilst connected to pcb board still, no battery attached. I apreciate all of your help.
  18. W

    Error 10, checked every connection, resistor black burnt smell

    Every ohm setting I put it on was no reading at all.
  19. W

    Error 10, checked every connection, resistor black burnt smell

    I cannot see the colour bands on it, so what would be the best 1 to order and replace it with?
  20. W

    Error 10, checked every connection, resistor black burnt smell

    Say this in lamans terms please. So the resister is burnt out.? I don't understand the paragraph above that tho.
  21. W

    Error 10, checked every connection, resistor black burnt smell

    How come the person above is saying nothing has no resistance? I'm getting more confused now
  22. W

    Error 10, checked every connection, resistor black burnt smell

    What do you mean?
  23. W

    Error 10, checked every connection, resistor black burnt smell

    looked up my multimeter and am using right setting, and getting no resistence at all
  24. W

    Error 10, checked every connection, resistor black burnt smell

    i dont know if im testing right but getting no resistence on any settings, im unsure if im testing it correctly
  25. W

    Error 10, checked every connection, resistor black burnt smell

    But i dont know what resister it is and how to test everything around it
Back
Top