Search results

Date Relevance Most replies

  1. A

    BBSHD binding

    Can you take pictures of your instalation?
  2. A

    BBSHD binding

    Left side circle, there should be a gap
  3. A

    BBSHD binding

    Are you sure you have a gap between the casing and the frame? There should be a little gap otherwise you are bending the casing and possible causing the crank to bind
  4. A

    Thread for new battery breakthrough PR releases

    I wouldnt say there are high energy density cells that have 5C, more like max 2-3C, looking at the data on nkon.nl for 21700 cell format
  5. A

    Thread for new battery breakthrough PR releases

    Mybe in terms of having a electric sports car. You have the high energy density batteries when you want high range and you have the high power batteries for high accelerarion and track times
  6. A

    KT Controller & Magura

    If I remember correctly the two pin red connector that you plug the mechanical ebrake sensor. The sensor has a switch inside the brake that is pressed when the lever is released therefore making it a normally closed
  7. A

    wheel motor has speedo wire. new KT controller does not. can speedo be added?

    Direct drive or geared hub?
  8. A

    Daly active bms - problem cell type and cell count

    Also a change from 24 to 20 can be solved with just different kind of wiring from cells to bms, alot of bms-s are capable for x cells but can be used with less if the manufacturer has provided wiring diagrams
  9. A

    KT36-SVPR-LCD + lcd7 voltage problem

    KISS
  10. A

    KT36-SVPR-LCD + lcd7 voltage problem

    You can also put a plastic bag over it
  11. A

    VESC Flipsky 75100 Pro V3 MSUX3k & 72CV 40ah HELP

    8 cells in parallel meaning 40/8=5. 5Ah in a 18650 format, I would like the same cells please my 21700 are trash compared to yours 18650
  12. A

    Help needed with new Scooter

    But "it's easy, it's just a cable in the controller"
  13. A

    VESC Flipsky 75100 Pro V3 MSUX3k & 72CV 40ah HELP

    Doubt thats 72v 40Ah in a downtube battery
  14. A

    Chain jumping off main chainwheel

    Why there wouldnt be one?
  15. A

    Chain jumping off main chainwheel

    What about front derrailleuer, is it properly set up? I see alot of people building mid drives remove it and commonly get their chain slipped off to the side of the chain ring
  16. A

    Rattling issue BBS02B

    https://endless-sphere.com/sphere/threads/bbs02b-after-10000km.126588/#post-1837979 Check this out, its because of a design flaw, nylon gear and rotor have helical pattern which produce lateral forces. Since bbs02b doesnt have thrust bearings the rotor forces itself onto the bearing and grinds...
  17. A

    Cycle life tests of High Energy density cylindrical cells

    21700 7Ah at 3.35V nominal? What chemistry is that?
  18. A

    Pre-Cut Nickel Strip Layout in a Triangle-shaped Battery

    Have you checked the amazon on the product page are there any pictures of the recomended layout for 14s8p
  19. A

    Are these Samsung batteries as advertised by manufacturer?

    Usualy genuine shimano brake pads are like 10€ so yeah I dont think so haha
  20. A

    Are these Samsung batteries as advertised by manufacturer?

    Disc Brake Pads Euybike sells brake pads on the website for $69,99?? Lol
  21. A

    Connector for 5A 48v charger, same diameter as DC5521 for dp Polly Case

    Reention battery high current charge port This one mybe?
  22. A

    Connector for 5A 48v charger, same diameter as DC5521 for dp Polly Case

    Why would it be damaging, in a common port bms the charger is connected the same as the main wires, check the jbd wiring diagram
  23. A

    Connector for 5A 48v charger, same diameter as DC5521 for dp Polly Case

    If you have a common port bms you can charge through the main battery connector
  24. A

    Hubmotor works only in learning mode, Throttle changes the turning direction and more!

    No, hall sensor 5 wires, you have it in your picture
  25. A

    Hubmotor works only in learning mode, Throttle changes the turning direction and more!

    Have you checked that all three hall sensors are working properly? Once I had troubles using non same brand motor and controller, wasted alot of time trying to find the working combination of halls and phase wires, only to later find one of my hall sensors was dead
Back
Top