Search results

Date Relevance Most replies

  1. S

    Controller upgrade indecisiveness

    Okay so a few days ago I was upgrading from MTB disc brakes to motorcycle disc brakes on my stealth clone. After reassembly I reconnected the phase wires to my sabvoton 150amp controller, and the hall wire connection. I jumped on turned the key and...pop...smoke... Done... For some reason my...
  2. S

    Enduro ebike moto seat mount?

    Are you looking for just the steel frame or the seat as well. I have an extra frame available
  3. S

    Sabvoton repair

    The blue wire in the hall connector was cut.. I replaced the hall connector and ran new wire. Then I gutted the phase wires and replaced em with 3 fat 6 gauge cables and she's running like a beast.
  4. S

    Sabvoton repair

    Okay I'm running a sabvoton 100a controller and having no success getting it to respond to the throttle. The controller is showing no faults but it is not responding at all to the throttle. On the parameters page of the mobile app it shows throttle voltage at .04 when I test it with a voltage...
  5. S

    Sabvoton repair

    Okay I disconnected the display and jumped the red and blue to get the controler on and now when I connect via Bluetooth all the parameters populate and I can use all programming features. Now when I went to run the hall test instead of spinning slowly the wheel jumps once then nothing the test...
  6. S

    Sabvoton repair

    Okay in my frustration I must have typed that wrong it is a TFT UKC1 display my applies @amberwolf they are compatible and do come as a set. However this display came with a different controller of the same model. Another issue that may help narrow it down is I can turn the controller and...
  7. S

    Sabvoton repair

    Okay so a lot of people on this forum building stealth clones know "Anne" and have had the pleasure of trying to decifer her broken english..you guessed it I'm struggling with NB Power and thier supposed tech support. So I'm gonna look for my answer here instead...bottom line what could cause...
  8. S

    Sabvoton repair

    Okay so I'll preface this by saying...Always disconnect your battery before working on your controller. So I was getting a communication error on my 100A Sabvoton. I traced the source of the problem to the connector coming from the display to the controller. I was rushing to do the repair and...
  9. S

    BMS compatability li-on vs life4po

    So here's my question I'm building a 20s 10p 72volt pack and I have a spare 24s lifepo4 BMS laying around. So since my only option is to wait 6 weeks to get a 20s bms I'm considering using the one I have...any thoughts? Now I know all the obvious...it's probably not a good idea just get a li-on...
Back
Top