Search results

Date Relevance Most replies

  1. S

    Replacement controller and display/controls

    Sorry, should have said! I have the controller in the second post, and a KT-LCD4.
  2. S

    Replacement controller and display/controls

    Yep, just the three wires from the motor, no hall/speed sensors. That's good to know! Does the only other parameter that matter then is current control and PAS sensor type?
  3. S

    Replacement controller and display/controls

    I took a while to order these. Controller and display arrived a few days ago and after some troubleshooting, I was able to make it work. Turns out, there was an additional problem. There was a connector in the motor cable for easy disconnection if a tube/tyre needed replacing. This connector had...
  4. S

    Replacement controller and display/controls

    Thanks! No, I would be happy without a speed readout, as long as the controller/display combo works without any speed sensing, either via motor hall sensors or an external speed sensor.
  5. S

    Replacement controller and display/controls

    Would the above need a speed sensor or would it be able to work without one? I dont believe my original bike has one. In my case, it would be the PAS sensor only,
  6. S

    Replacement controller and display/controls

    Hmm, I think you're right, that controller appears to be the correct one, to incorporate the 3 wire brake levers. Thanks, I will have a look!
  7. S

    Replacement controller and display/controls

    Hi, I bought a broken second hand EBike (Wayscral Easyway E1, or a very similar (if not the same) is a Wayscral Basy 315), which I am in the process of repairing. I suspect the problem with the bike is a faulty display/control, as when I opened it up, there was quite a bit of corrosion. After...
Back
Top