Search results

Date Relevance Most replies

  1. L

    NYX ebike for sale

    What does that mean? Am I asking for too much? Im just looking for a fair deal. Please advise
  2. L

    NYX ebike for sale

    Hi, im an enthusiast from the online forum and thought I would post my NYX for sale. Its essentially brand new because the original MXUS motor died 3 days after I got it. I always thought I would fix it but I have 2 of them and never got around to it. The battery was old and died. Its got the...
  3. L

    18 FET 4115 MOSFET 84-132V Real Highway Speed Controller $259

    For sale is a brand new never used Lyen 18 FET 4115 MOSFET 31-132V Real Highway Speed Controller. I had Lyen add selectable voltage and beef up the traces with extra copper. Wouldnt mind getting $200 for it.
  4. L

    Farasis 58 and 60ah 20s1p build questions

    Theres so many different pouches available, any chance you can narrow down the best pouches that will fit the EIG holders? Im running an adaptto Max-E into QS205. I want battery amps and 20S 🙏
  5. L

    Farasis 58 and 60ah 20s1p build questions

    Im not sure, maybe it was just the BMS. I will probably replace the EIG cells with Farasis. I attemped to revive some dead EIG cells but while the voltage goes up, they arent storing much power at all. Im asking about the frames because Im considering the 60ah cells which are 10mm thick. The EIG...
  6. L

    Farasis 58 and 60ah 20s1p build questions

    Hello, im thinking about replacing my EIG battery pack with these new Farasis cells. Does anyone have a 3d print file for the frames/holders? Is there anything i need to know before I pull the trigger? Unfortunately, my EIG battery in my NYX committed suicide. I always had 1 cell that wouldnt...
  7. L

    QSMOTOR,0.5-12kW Electric Hub Motor & Mid Drive Motor Manufacture China

    Just email vito@tzquanshun.com, he will hook you up! He works there
  8. L

    QSMOTOR,0.5-12kW Electric Hub Motor & Mid Drive Motor Manufacture China

    I think CNQS is the Chinese version of the web site
  9. L

    E-S Stealth Electric Bike Owners

    They bend easily. Use a vice. Bend them until you are satisfied with the distance between the crank arm and the swingarm when the arm is horizontal
  10. L

    Nucular Electronics owner's thread (setup infos, FW updates, links etc.)

    OMG, I just searched my email for my preorder date and its only been a month :|
  11. L

    E-S Stealth Electric Bike Owners

    Kenny says there's no 55100s available. I'm not sure if I want an H5580. I want my back wheel to be 12 pounds lighter, though. Rix, will I be happy with the power? How many phase amps are you giving it?
  12. L

    QSMOTOR,0.5-12kW Electric Hub Motor & Mid Drive Motor Manufacture China

    Are you looking at the wobble of the rear sprocket? That's where it can be seen best like in the vid. I took it apart again to check out the bearings, again. QS motor said to check run out. What surface should I put my run out gauge on to check run out?
  13. L

    QSMOTOR,0.5-12kW Electric Hub Motor & Mid Drive Motor Manufacture China

    Hello, my 205 50H V3 looks like it moves around on the sprocket side. When I speed up the motor with no load, it vibrates like its out of balance. Ive removed the covers to check that the bearings are seated and to see if I could fix it by reinstalling the covers bit its never fixed. Its...
  14. L

    Adaptto Mini-E/Max-E Owner's Thread

    Hello everyone, i have several different brands of motors that I want to rewire for my adaptto. I want all the wires for all the motors to be be in sync to speed up switching the rear wheel/tire/motor. Does the rotational position of the halls wires correspond to the rotational position of the...
  15. L

    E-S Stealth Electric Bike Owners

    Is there a source in China where I can buy crystalyte motors like QS?
  16. L

    E-S Stealth Electric Bike Owners

    Will this missing piece affect anything until I get a new motor? The corner of the magnet was flipping up and grinding against the stator. The particles combined with the Ferrofluid and turned to clumps. Its probably the reason the magnets are still attached
  17. L

    E-S Stealth Electric Bike Owners

    I think my magnets are going to come off soon. I think I'll try to get an H55100. Am I looking for an H55 with 137mm dropouts or 162mm? My bomber dropouts are 162mm but will the 162mm fit? I need the 137, right?
  18. L

    E-S Stealth Electric Bike Owners

    I decided to check the motor. I had put some internet Ferrofluid in the motor before Statorfluid came out. It's dried out and clumpy. It also smells strongly of chemicals. Oddly, a triangular shaped piece broke off of one of my magnets and has been dragging on the stator. I pulled the broken...
  19. L

    E-S Stealth Electric Bike Owners

    Ok, one more question about the swingarm clamps that go around the bearings. Should I tighten one bolt on each side first so that the mating surfaces touch or tighten all bolts evenly which would give me a gap at each bolt? Usually, I clamp one side all the way down, like on a handlebar clamp...
  20. L

    E-S Stealth Electric Bike Owners

    Its fixed. Bearings slid off by hand. Thanks y'all!
  21. L

    E-S Stealth Electric Bike Owners

    Yes, I've found your thread very helpful. I've been over it several times in the last few days. I'm sure I'll figure the rest out. Thank you, sir!
  22. L

    E-S Stealth Electric Bike Owners

    May I ask what you used to pull the bearings off? Do I need a special puller or do they come off by hand? My right side bearing is totally gone. The left side is like gravel. I got some shielded and sealed bearings I thought might work better to keep water out. I think I made the chain too tight...
  23. L

    E-S Stealth Electric Bike Owners

    Ok, it looks like I use BBT-22 to remove the bottom bracket thingies to get to the bearings...
  24. L

    E-S Stealth Electric Bike Owners

    Hi All, I'm searching the board on how to replace the Vboxx bearings that the swingarm bolts to. I've seen some videos and topics but I don't want to disassemble the Vboxx. I just want to do the bearings. Is it possible without removing the covers? I don't want to misalign the gears so I...
  25. L

    Adaptto Mini-E/Max-E Owner's Thread

    Yes, it is an E96 marked 18C. I replaced it with a 0603 1% 1/10th watt. I reset multiple times and loaded firmware. No dice. It doesnt work with temp sensor disconnected. Doesn't work with no sensor set in the setup. I guess I've got a $1000 paperweight.
Back
Top